The John Deere 3025E is a 4WD compact utility tractor from the 3E series. This tractor has been manufactured by John Deere in Augusta, Georgia, USA since 2017. The JD 3025E is equipped with a 1.6 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.
The JD 3025E compact utility tractor used the Yanmar 3TNV88F or engine. It is a 1.6 L, 1,642 cm2, (100.2 cu·in) three-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 24.8 PS (18.2 kW; 24.4 HP) at 2,400 rpm of maximum output power.
The John Deere 3025E is equipped with power steering, two-post foldable ROPS and 23.5 liters (6.2 US gal.; 5.2 Imp. gal) or 28.5 liters (7.5 US gal, 6.3 Imp. gal) fuel tank.
John Deere 3025E Specifications
| General Specifications | |
| Model | John Deere 3025E |
| Length | 2,945 mm (115.9 in) |
| Width | 1,569 mm (61.8 in) |
| Height | 2,422 mm (95.4 in) |
| Wheel base | 1,594 mm (62.8 in) |
| Weight | 1,028 kg (2266 lbs) |
| Fuel tank capacity | 23.5 liters (6.2 US gal.; 5.2 Imp. gal) 28.5 liters (7.5 US gal, 6.3 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | Yanmar 3TNV88F-EPJT1 or 3TNV88F-EPJT2 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.6 L, 1,642 cm2, (100.2 cu·in) |
| Bore and stroke | 88.0 mm X 90.0 mm (3.46 in X 3.54 in) |
| Compression ratio | 19.0:1 |
| Horsepower | 24.8 PS (18.2 kW; 24.4 HP) at 2,400 rpm |
| Torque | 87.8 N·m (9 kg·m, 64.7 ft·lb) |
| Starter | Electric |
| Oil capacity: | 3TNV88F-EPJT1: 4.1 L (4.33 US.qts, 3.61 Imp. qts) 3TNV88F-EPJT2: 4.9 L (5.18 US qts, 4.31 Imp. qts) |
| Coolant capacity: | 3TNV88F-EPJT1: 4.0 L (4.23 US qts, 3.52 Imp. qts) 3TNV88F-EPJT2: 4.3 L (4.54 US qts, 3.78 Imp. qts) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Power |
| Differential lock | Mechanical rear |
| Final drive | Spur gear |
| Front axle case | 3.2 L (3.38 US qts, 2.82 Imp. qts) 3.8 L (4.02 US qts, 3.34 Imp. qts) |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 22.7 kmh (14.1 mph) Reverse: 22.7 (14.1 mph) |
| Transmission oil capacity | 21.0 L (5.5 US. gal, 4.6 Imp. gal.) |
| Tires | |
| Front tires | Ag: 7-14 Lawn/turf: 27×8.5-15 Industrial: 25×8.5-14 |
| Rear tires | Ag: 11.2-24 Lawn/turf: 41×14-20 Industrial: 15-19.5 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 21.0 L (22.19 US. qt, 18.48 Imp. qt.) |
| Pressure | 2500 psi (172.4 bar) |
| Valves | 0 to 2 |
| Pump flow | 5.3 gpm (20.1 lpm) |
| Steering flow | 4.0 gpm (15.1 lpm) |
| Total flow | 9.3 gpm (35.2 lpm) |
HOW MUCH WEIGHT CAN A 3025E PULL?
Rear hitch won’t go up and down. 3025 model. Year 2021.