The Massey Ferguson 1130 is a 2WD row-crop tractor manufactured by Massey Ferguson from 1964 to 1972. The Massey Ferguson 1130 is equipped with a 5.8 L (354.0 cu·in) six-cylinder diesel engine and a two-speed power shift transmission with 12 forward and 4 reverse gears and dry disc clutch.
The Massey Ferguson 1130 row-crop tractor used the Perkins AT6.345 engine. It is a 5.8 L, 5,801 cm2, (354.0 cu·in) six-cylinder turbocharged diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 121.7 PS (89.5 kW; 120.0 HP) at 2,200 rpm of output power.
The MF 1130 is equipped with power assist steering, hydraulic disc brakes, open operator station or cab (optional), and 189.1 liters (50.0 US gal.; 41.6 Imp. gal) fuel tank.
Massey Ferguson 1130 Specifications
| General Specifications | |
| Model | Massey Ferguson 1130 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,600 mm (102.4 in) |
| Ground clearance | 430 mm (16.9 in) |
| Weight (operating) | 6,150 kg (13,558 lbs) |
| Fuel tank capacity | 189.1 liters (50 US gal.; 41.6 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station or Cab (optional) |
| Engine | |
| Engine model | Perkins AT6.345 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 5.8 L, 5,801 cm2, (354.0 cu·in) |
| Bore and stroke | 98.0 mm X 127.0 mm (3.86 in X 5 in) |
| Compression ratio | 16.0:1 |
| Horsepower | 121.7 PS (89.5 kW; 120.0 HP) at 2,200 rpm |
| Starter | Electric |
| Coolant capacity: | 20.8 L (22 US. qt, 18.3 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Power assist |
| Brakes | Hydraulic disc |
| Transmission model | Multi-Power |
| Transmission type | Two-speed power shift with dry disc clutch |
| Gears | 12 forward and 4 reverse |
| Speed | Forward: 26.9 kmh (16.7 mph) Reverse: 10.1 (6.3 mph) |
| Tires | |
| Front tires | Ag: 11.00-16 |
| Rear tires | Ag: 24.5-32 |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Valves | 1 |
| Pump flow | 20.0 gpm (75.7 lpm) |
Be the first to comment