Massey Ferguson 1130

Massey Ferguson 1130The Massey Ferguson 1130 is a 2WD row-crop tractor manufactured by Massey Ferguson from 1964 to 1972. The Massey Ferguson 1130 is equipped with a 5.8 L (354.0 cu·in) six-cylinder diesel engine and a two-speed power shift transmission with 12 forward and 4 reverse gears and dry disc clutch.

The Massey Ferguson 1130 row-crop tractor used the Perkins AT6.345 engine. It is a 5.8 L, 5,801 cm2, (354.0 cu·in) six-cylinder turbocharged diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 121.7 PS (89.5 kW; 120.0 HP) at 2,200 rpm of output power.

The MF 1130 is equipped with power assist steering, hydraulic disc brakes, open operator station or cab (optional), and 189.1 liters (50.0 US gal.; 41.6 Imp. gal) fuel tank.

Massey Ferguson 1130 Specifications

General Specifications
ModelMassey Ferguson 1130
Length–
Width–
Height–
Wheel base2,600 mm (102.4 in)
Ground clearance430 mm (16.9 in)
Weight (operating)6,150 kg (13,558 lbs)
Fuel tank capacity189.1 liters (50 US gal.; 41.6 Imp. gal)
Battery12V
Cabin typeOpen operator station or Cab (optional)
Engine
Engine modelPerkins AT6.345
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement5.8 L, 5,801 cm2, (354.0 cu·in)
Bore and stroke98.0 mm X 127.0 mm (3.86 in X 5 in)
Compression ratio16.0:1
Horsepower121.7 PS (89.5 kW; 120.0 HP) at 2,200 rpm
StarterElectric
Coolant capacity:20.8 L (22 US. qt, 18.3 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typePower assist
BrakesHydraulic disc
Transmission modelMulti-Power
Transmission typeTwo-speed power shift with dry disc clutch
Gears12 forward and 4 reverse
Speed Forward: 26.9 kmh (16.7 mph) Reverse: 10.1 (6.3 mph)
Tires
Front tires Ag: 11.00-16
Rear tires Ag: 24.5-32
Three-Point Hitch
CaterogyII
Control type–
Lift capacity (at ends)–
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1,000 rpm
Hydraulic system
Hydraulic type–
Valves1
Pump flow20.0 gpm (75.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*