The Cub Cadet 1015 is a 2WD lawn tractor manufactured by the Cub Cadet (a part of MTD) from 1988 to 1991. The Cub Cadet 1015 is equipped with 399 cm2 single-cylinder gasoline engine and gear type transmission with 5 forward and 1 reverse gear.
The Cub Cadet 1015 lawn tractor used 0.4 L, 399 cm2, (24.35 cu·in) single-cylinder air-cooled Briggs & Stratton gasoline engine with 87.0 mm (3.43 in) of cylinder bore and 67.0 mm (2.64 in) of piston stroke. This engine produced 10.2 PS (7.5 kW; 10.0 HP) of maximum output power. The Cub Cadet 1015 is equipped with manual sector-and-pinion steering, mechanical disc brakes, open operator station and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank. This lawn tractor used 32 in (810 mm) mid-mount Cub Cadet two-blade mower deck with manual lift.
Cub Cadet 1015 Specifications
| General Specifications | |
| Model | Cub Cadet 1015 |
| Length | 1,730 mm (68.1 in) |
| Width | – |
| Height | – |
| Wheel base | 1,140 mm (44.9 in) |
| Weight | 180 kg (396.8 lbs) |
| Fuel tank capacity | 11.4 liters (3 US gal.; 2.5 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Briggs & Stratton |
| Engine type | Four-stroke, air-cooled, inline |
| Cylinders | 1 |
| Fuel type | Gasoline |
| Displacement | 0.4 L, 399 cm2, (24.35 cu·in) |
| Bore and stroke | 87.0 mm X 67.0 mm (3.43 in X 2.64 in) |
| Horsepower | 10.2 PS (7.5 kW; 10.0 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual sector-and-pinion |
| Brakes | Mechanical disc |
| Transmission model | – |
| Transmission type | Gear type |
| Gears | 5 forward and 1 reverse |
| Speed | Forward: 8.8 kmh (5.5 mph) Reverse: 3.8 (2.4 mph) |
| Tires | |
| Front tires | Lawn/turft: 15×6-6 |
| Rear tires | Lawn/turf: 18×8.5-8 |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with mechanical clutch |
| Rear PTO spped | – |