Cub Cadet 124

Cub Cadet 124The Cub Cadet 124 is a 2WD garden tractor from the 1X4/1X5 series. This tractor was manufactured by the Cub Cadet (a part of International Harvester) in Louisville, Kentucky, USA from 1967 to 1969. The Cub Cadet 124 is equipped with a 0.5 L single-cylinder gasoline engine and shaft-driven gear type transmission with dry disc clutch and 3 forward and 1 reverse gear or creeper with 6 forward and 2 reverse gear.

The Cub Cadet 124 garden tractor used the Kohler K301AS engine. It is a 0.5 L, 476 cm2, (29 cu·in) single-cylinder natural aspirated gasoline engine with 85.7 mm (3.37 in) of the cylinder bore and 82.6 mm (3.25 in) of the piston stroke. This engine produced 12.1 PS (8.9 kW; 12.0 HP) at 3,600 rpm of maximum output power.

The Cub Cadet 124 is equipped with manual steering, dry disc brakes, open operator station and 7.6 liters (2 US gal.; 1.7 Imp. gal) fuel tank.

Following attachments are available for the Cub Cadet 124 garden tractor:

  • Mid-mount Cub Cadet 38 in (960 mm) mower deck with 3-blades and manual lift
  • Mid-mount Cub Cadet 42 in (1,060 mm) mower deck with 3-blades and manual lift
  • Mid-mount Cub Cadet 48 in (1,210 mm) mower deck with 3-blades and manual lift
  • Font-mount Cub Cadet 42 in (1,060 mm) blade
  • Font-mount Cub Cadet 36 in (910 mm) snow blower
  • Font-mount Cub Cadet 42 in (1,060 mm) snow blower

Cub Cadet 124 Specifications

General Specifications
Model Cub Cadet 124
Length 1,620 mm (63.8 in)
Width 910 mm (35.8 in)
Height 1,,000 mm (39.4 in)
Wheel base 1090 mm (42.9 in)
Weight 285 kg (628.3 lbs)
Fuel tank capacity 7.6 liters (2 US gal.; 1.7 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model Kohler K301AS
Engine type Four-stroke, air-cooled, inline
Cylinders 1
Fuel type Gasoline
Displacement 0.5 L, 476 cm2, (29.0 cu·in)
Bore and stroke 85.7 mm X 82.6 mm (3.37 in X 3.25 in)
Compression ratio 6.0:1
Horsepower 12.1 PS (8.9 kW; 11.9 HP) at 3,600 rpm
Starter Electric
Oil type SAE 10W-30; API SF or SG
Oil capacity 1.4 L (1.5 US.qts, 1.23 Imp. qts)
Spark plug Champion: RH10
Intake valve clearance 0.20-0.25 mm (0.0079-0.0098 in)
Exhaust valve clearance 0.43-0.48 mm (0.0169-0.0189 in)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Dry disc
Transmission model
Transmission type Shaft-driven gear type with dry disc clutch
Gears 3 forward and 1 reverse
Speed Forward: 11.0 kmh (6.8 mph) Reverse: 4.0 (2.5 mph)
Transmission oil capacity 3.3 L (0.9 US. gal, 0.7 Imp. gal.)
Transmission model
Transmission type Creeper
Gears 6 forward and 2 reverse
Speed Forward: 10.9 kmh (6.8 mph) Reverse: 4.0 (2.5 mph)
Tires
Front tires Lawn/turf: 4.80×4.00-8
Rear tires Lawn/turf: 23×8.50-12
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO spped
Rear PTO type Transmission
Rear PTO spped
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*