Cub Cadet 1720

Cub Cadet 1720The Cub Cadet 1720 is a 2WD lawn tractor manufactured by Cub Cadet (a part of MTD) from 1988 to 1991. The Cub Cadet 1720 is equipped with a 0.7 L (42.2 cu·in) two-cylinder gasoline engine and a hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet 1720 lawn tractor used the Kohler Magnum MV18 engine. It is a 0.7 L, 691 cm2, (42.2 cu·in) two-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 70.0 mm (2.76 in) of the piston stroke. The compression ratio rating is 6.0:1. This engine produced 17.3 PS (12.7 kW; 17.0 HP) of output power.

The Cub Cadet 1720 is equipped with manual steering, dry disc brakes, an open operator station, and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.

Following attachments are available for the Cub Cadet 1720 lawn tractor:

  • Mid-mount Cub Cadet 960 mm (38 in) mower deck with 2-blades and manual lift
  • Mid-mount Cub Cadet 1,160 mm (46 in) mower deck with 3-blades and manual lift

Cub Cadet 1720 Specifications

General Specifications
ModelCub Cadet 1720
Length1,730 mm (68.1 in)
Width
Height
Wheel base1,140 mm (44.9 in)
Ground clearance
Weight1,910 kg (4,211 lbs)
Fuel tank capacity11.4 liters (3 US gal.; 2.5 Imp. gal)
Battery12V
Cabin typeOpen operator station
Engine
Engine modelKohler MV18
Engine typeFour-stroke, air-cooled, V
Cylinders2
Fuel typeGasoline
Displacement0.7 L, 691 cm2, (42.2 cu·in)
Bore and stroke79.0 mm X 70.0 mm (3.11 in X 2.76 in)
Compression ratio6.0:1
Horsepower17.3 PS (12.7 kW; 17.0 HP)
StarterElectric
Oil typeSAE 10W-30
Oil capacity:1.9 L (2 US. qt, 1.7 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeManual
BrakesDry disc
Transmission model
Transmission typeHydrostatic
GearsInfinite forward and reverse
Speed Forward: 8.8 kmh (5.5 mph) Reverse: 4.8 (3 mph)
Tires
Front tires Lawn/turf: 15x6x6
Rear tires Lawn/turf: 20x10x8
PTO (Power take-off shaft)
Front PTO typeIndependent with electric clutch
Front PTO speed
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*