The Cub Cadet 1811 is a 2WD lawn and garden tractor manufactured by Cub Cadet (a part of MTD) in Brownsville, Tennessee, USA from 1986 to 1989. The Cub Cadet 1811 is equipped with a 0.7 L (42.2 cu·in) two-cylinder gasoline engine and a shaft-driven hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet 1811 garden tractor used the Kohler M18 engine. It is a 0.7 L, 691 cm2, (42.2 cu·in) two-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 70.0 mm (2.76 in) of the piston stroke. This engine produced 18.2 PS (13.4 kW; 18.0 HP) of maximum output power.
The Cub Cadet 1811 is equipped with manual steering, dry disc brakes, open operator station and 15.1 liters (4 US gal.; 3.3 Imp. gal) fuel tank.
Following attachments are available for the Cub Cadet 1811 garden tractor:
- Mid-mount Cub Cadet 38 in (960 mm) mower deck with hydraulic lift
- Mid-mount Cub Cadet 44 in (1,110 mm) mower deck with hydraulic lift
- Mid-mount Cub Cadet 50 in (1,270 mm) mower deck with hydraulic lift
- Front-mount Cub Cadet 42 in (1,060 mm) blade
- Front-mount Cub Cadet 54 in (1,370 mm) blade
- Front-mount Cub Cadet 45 in (1,150 mm) two-stage snowblower
Cub Cadet 1811 Specifications
General Specifications | |
Model | Cub Cadet 1811 |
Length | 1,820 mm (71.7 in) |
Width | 950 mm (37.4 in) |
Height | 1,090 mm (42.9 in) |
Wheel base | 1,110 mm (43.7 in) |
Ground clearance | 150 mm (5.9 in) |
Weight | kg (0 lbs) |
Fuel tank capacity | 15.1 liters (4 US gal.; 3.3 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | Kohler M18 |
Engine type | Four-stroke, air-cooled, V |
Cylinders | 2 |
Fuel type | Gasoline |
Displacement | 0.7 L, 691 cm2, (42.2 cu·in) |
Bore and stroke | 79.0 mm X 70.0 mm (3.11 in X 2.76 in) |
Horsepower | 18.2 PS (13.4 kW; 18.0 HP) |
Starter | Electric |
Oil capacity: | 1.9 L (2 US. qt, 1.7 Imp. qt.) |
Spark plug |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Dry disc |
Final drive | |
Transmission model | – |
Transmission type | Shaft-driven hydrostatic |
Gears | Infinite forward and reverse |
Speed | Forward: 12.1 kmh (7.5 mph) Reverse: 6.4 (4 mph) |
Transmission oil capacity | 6.6 L (1.7 US. gal, 1.5 Imp. gal.) |
Tires | |
Front tires | Lawn/turf: 16×6.50-8 |
Rear tires | Lawn/turf: 23×10.50-12 |
Three-Point Hitch | |
Caterogy | 0 |
Control type | |
Lift capacity (at ends) | kg (0 lbs) |
PTO (Power take-off shaft) | |
Front PTO type | Independent with electric clutch |
Front PTO speed | – rpm |