Cub Cadet 2146

Cub Cadet 2146The Cub Cadet 2146 is a 2WD lawn tractor from the 2000 series. This tractor was manufactured by the Cub Cadet (a part of MTD) from 2000 to 2001. The Cub Cadet 2146 is equipped with a 0.4 L single-cylinder gasoline engine and shaft-driven hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet 2146 lawn tractor used the Linamar ZX390 engine. It is a 0.4 L, 388 cm2, (23.7 cu·in) single-cylinder natural aspirated gasoline engine with 84.0 mm (3.31 in) of the cylinder bore and 70.0 mm (2.76 in) of the piston stroke. This engine produced 14.1 PS (10.4 kW; 14.0 HP) at 3,600 rpm of maximum output power.

The Cub Cadet 2146 is equipped with manual steering, internal expanding brakes, open operator station, 8.5 liters (2.2 US gal.; 1.9 Imp. gal) fuel tank and mid-mount 38 in (960 mm) mower deck with 2-blades and manual lift.

Cub Cadet 2146 Specifications

General Specifications
ModelCub Cadet 2146
Length1,820 mm (71.7 in)
Width1,145 mm (45.1 in)
Height1,067 mm (42 in)
Wheel base1,190 mm (46.9 in)
Weight310 kg (683 lbs)
Fuel tank capacity8.5 liters (2.2 US gal.; 1.9 Imp. gal)
Cabin typeOpen operator station
Engine modelLinamar ZX390
Engine typeFour-stroke, air-cooled, inline
Fuel typeGasoline
Displacement0.4 L, 388 cm2, (23.7 cu·in)
Bore and stroke84.0 mm X 70.0 mm (3.31 in X 2.76 in)
Horsepower14.1 PS (10.4 kW; 13.9 HP) at 3,600 rpm
Oil capacity:1.9 L (2.01 US. qt, 1.67 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeManual
BrakesInternal expanding
Transmission model
Transmission typeShaft-driven hydrostatic
GearsInfinite forward and reverse
Speed Forward: 8.8 kmh (5.5 mph) Reverse: 5.6 (3.5 mph)
Front tiresLawn/turf: 15×6.5
Rear tiresLawn/turf: 20×9
PTO (Power take-off shaft)
Front PTO typeIndependent with electric clutch
Front PTO spped
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.