Cub Cadet 2206

Cub Cadet 2206The Cub Cadet 2206 is a 2WD garden tractor from the 2000 series. This tractor was manufactured by Cub Cadet (a part of MTD) from 2000 to 2002. The Cub Cadet 2206 is equipped with a 0.6 L (38.1 cu·in) two-cylinder gasoline engine and a shaft-driven hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet 2206 garden tractor used the Kohler Command engine. It is a 0.6 L, 624 cm2, (38.1 cu·in) two-cylinder natural aspirated gasoline engine with 77.0 mm (3.03 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke. This engine produced 20.3 PS (14.9 kW; 20.0 HP) at 3,600 rpm of output power.

The Cub Cadet 2206 is equipped with manual steering, internal expanding brakes, open operator station, 7.9 liters (2.1 US gal.; 1.7 Imp. gal) fuel tank, and mid-mount the Cub Cadet 1,210 mm (48 in) mower deck with 3-blades and manual lift.

Cub Cadet 2206 Specifications

General Specifications
Model Cub Cadet 2206
Length 1,820 mm (71.7 in)
Width 1,420 mm (55.9 in)
Height 1,090 mm (42.9 in)
Wheel base 1,190 mm (46.9 in)
Ground clearance 150 mm (5.9 in)
Weight
Fuel tank capacity 7.9 liters (2.1 US gal.; 1.7 Imp. gal)
Battery 12V, CCA 275A
Cabin type Open operator station
Engine
Engine model Kohler Command
Engine type Four-stroke, air-cooled
Cylinders 2
Fuel type Gasoline
Displacement 0.6 L, 624 cm2, (38.1 cu·in)
Bore and stroke 77.0 mm X 67.0 mm (3.03 in X 2.64 in)
Horsepower 20.3 PS (14.9 kW; 20 HP) at 3,600 rpm
Starter Electric
Oil capacity: 1.9 L (2 US. qt, 1.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Internal expanding
Transmission model
Transmission type Shaft-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 9.7 kmh (6 mph) Reverse: 4.8 (3 mph)
Transmission oil capacity 5.7 L (1.5 US. gal, 1.3 Imp. gal.)
Tires
Front tires Lawn/turf: 16×6.5-8
Rear tires Lawn/turf: 23×9.5-12
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO speed
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*