The Cub Cadet GT 2554 is a 2WD garden tractor from the 2500 series. This tractor was manufactured by Cub Cadet (a part of MTD) from 2005 to 2010. The Cub Cadet GT 2554 is equipped with a 0.7 L (41.1 cu·in) two-cylinder gasoline engine and a hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet GT 2554 garden tractor used the Kohler Command CH23S engine. It is a 0.7 L, 674 cm2, (41.1 cu·in) V-twin natural aspirated gasoline engine with 80.0 mm (3.15 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke. This engine produced 23.7 PS (17.2 kW; 23.0 HP) at 3,600 rpm of output power.
The Cub Cadet GT 2554 is equipped with manual steering, dry disc brakes, an open operator station, and 8.5 liters (2.2 US gal.; 1.9 Imp. gal) fuel tank.
Following attachments are available for the Cub Cadet GT 2554 garden tractor:
- Mid-mount Cub Cadet 1,370 mm (54 in) mower deck with 3-blades and manual spring-assisted lift
- Front-mount Cub Cadet 190-302 1,060 mm (42 in) blade
- Front-mount Cub Cadet 190-341 1,060 mm (42 in) two-stage snow blower
Cub Cadet GT 2554 Specifications
| General Specifications | |
| Model | Cub Cadet GT 2554 |
| Length | 1,820 mm (71.7 in) |
| Width | 1,525 mm (60 in) |
| Height | 1,067 mm (42 in) |
| Wheel base | 1,190 mm (46.9 in) |
| Ground clearance | 150 mm (5.9 in) |
| Weight | 383 kg (844 lbs) |
| Fuel tank capacity | 8.5 liters (2.2 US gal.; 1.9 Imp. gal) |
| Battery | 12V, CCA 275A |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Kohler Command CH23S |
| Engine type | Four-stroke, air-cooled, V-twin |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 0.7 L, 674 cm2, (41.1 cu·in) |
| Bore and stroke | 80.0 mm X 67.0 mm (3.15 in X 2.64 in) |
| Horsepower | 23.7 PS (17.2 kW; 23.0 HP) at 3,600 rpm |
| Torque | 51.2 N·m (5.2 kg·m, 37.7 ft·lb) at 2,400 rpm |
| Starter | Electric |
| Oil capacity: | 1.9 L (2 US. qt, 1.7 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | Dry disc |
| Transmission model | Hydro-Gear BDU-10 |
| Transmission type | Hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 9.3 kmh (5.8 mph) Reverse: 5.6 kmh (3.5 mph) |
| Transmission oil capacity | 5.4 L (1.4 US. gal, 1.2 Imp. gal.) |
| Tires | |
| Front tires | Lawn/turf: 16×6.5-8 |
| Rear tires | Lawn/turf: 23×9.5-12 |
| Three-Point Hitch | |
| Category | Sleeve hitch (optional) |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent with electric clutch |
| Front PTO speed | – |
Be the first to comment