Cub Cadet LT1024

Cub Cadet LT1024The Cub Cadet LT1024 is a 2WD lawn tractor from the LT 1000 series. This tractor was manufactured by Cub Cadet (a part of MTD) during 2004. The Cub Cadet LT1024 is equipped with a 0.7 L (44.2 cu·in) V-twin gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet LT1024 lawn tractor used the Briggs & Stratton 446777 engine. It is a 0.7 L, 724 cm2, (44.2 cu·in) V-twin natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. The compression ratio rating is 8.5:1. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,600 rpm of maximum output power and 44.1 N·m (4.5 kg·m, 32.5 ft·lb) at 2,400 rpm of torque.

The Cub Cadet LT1024 is equipped with manual steering, dry disc brakes, open operator station, and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.

Following attachments are available for the Cub Cadet LT1024 lawn tractor:

  • Mid-mount Cub Cadet 50 in (1,270 mm) mower deck with 3-blade and manual lift
  • Front-mount Cub Cadet 190-674 46 in (1,160 mm) blade
  • Front-mount Cub Cadet 190-673 42 in (1,060 mm) two-stage snow blower

Cub Cadet LT1024 Specifications

General Specifications
Model Cub Cadet LT1024
Length 1,720 mm (67.7 in)
Width 1,370 mm (53.9 in)
Height 1,090 mm (42.9 in)
Wheel base 1,190 mm (46.9 in)
Ground clearance 110 mm (4.3 in)
Weight 236 kg (520 lbs)
Fuel tank capacity 11.4 liters (3 US gal.; 2.5 Imp. gal)
Battery 12V, CCA 270A
Cabin type Open operator station
Engine
Engine model Briggs & Stratton 446777
Engine type Four-stroke, air-cooled, V-twin
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 724 cm2, (44.2 cu·in)
Bore and stroke 79.0 mm X 73.0 mm (3.11 in X 2.87 in)
Compression ratio 8.5:1
Horsepower 24.3 PS (17.9 kW; 24.0 HP) at 3,600 rpm
Torque 44.1 N·m (4.5 kg·m, 32.5 ft·lb) at 2,400 rpm
Starter Electric
Oil capacity: 1.9 L (2 US. qt, 1.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Dry disc
Transmission model Hydro-Gear 311-0510
Transmission type Belt-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 8.4 kmh (5.2 mph) Reverse: 3.7 (2.3 mph)
Tires
Front tires Lawn/turf: 15x6x6
Rear tires Lawn/turf: 20x9x8
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO speed
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*