The Cub Cadet LTX 1040 is a 2WD lawn tractor from the LTX 1000 series. This tractor was manufactured by the Cub Cadet (a part of MTD) from 2009 to 2014. The Cub Cadet LTX 1040 is equipped with a 0.6 L single-cylinder air-cooled gasoline engine and automatic CVT transmission with infinite forward and reverse gears.
The Cub Cadet LTX1040 lawn tractor used the Kohler Courage SV590 engine. It is a 0.6 L, 597 cm2, (36.4 cu·in) single-cylinder natural aspirated gasoline engine with 94.0 mm (3.7 in) of the cylinder bore and 86.0 mm (3.39 in) of the piston stroke. The compression ratio rating is 8.5:1. This engine produced 19.3 PS (14.2 kW; 19.0 HP) of maximum output power and 44.7 N·m (4.6 kg·m, 32.9 ft·lb) of torque.
The Cub Cadet LTX 1040 is equipped with the manual sector and pinion steering, independent front PTO shaft, open operator station, and 12.5 liters (3.3 US gal.; 2.7 Imp. gal) fuel tank.
Following attachments are available for Cub Cadet LTX1040 lawn tractor:
- Mid-mount Cub Cadet: 42 inch (1,060 mm) mower deck with two-blades and manual lift
- Front-mount Cub Cadet 190-833: 46 inch (1,160 mm) blade
- Front-mount Cub Cadet 190-032 : 42 inch (1,060 mm) front-mount snowblower
Cub Cadet LTX 1040 Specifications
| General Specifications | |
| Model | Cub Cadet LTX 1040 |
| Length | 1,750 mm (68.9 in) |
| Width | – |
| Height | – |
| Wheel base | 1,200 mm (47.2 in) |
| Weight | 212 kg (467.4 lbs) |
| Fuel tank capacity | 12.5 liters (3.3 US gal.; 2.7 Imp. gal) |
| Battery | 12V CCA: 19A |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Kohler Courage SV590 |
| Engine type | Four-stroke, air-cooled, inline |
| Cylinders | 1 |
| Fuel type | Gasoline |
| Displacement | 0.6 L, 597 cm2, (36.4 cu·in) |
| Bore and stroke | 94.0 mm X 86.0 mm (3.7 in X 3.39 in) |
| Compression ratio | 8.5:1 |
| Horsepower | 19.3 PS (14.2 kW; 19.0 HP) |
| Torque | 44.7 N·m (4.6 kg·m, 32.9 ft·lb) |
| Starter | Electric |
| Oil type | SAE 10W-30, API: SJ |
| Oil capacity: | 1.5 L (1.59 US. qt, 1.32 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual sector and pinion |
| Brakes | – |
| Transmission model | – |
| Transmission type | Automatic CVT |
| Gears | Infinite forward and reverse |
| Speed | Forward: 8.4 kmh (5.2 mph) Reverse: 8.4 (5.2 mph) |
| Transmission oil capacity | 0.6 L (0.63 US. qt, 0.53 Imp. qt.) |
| Tires | |
| Front tires | Lawn/turf: 15×6 |
| Rear tires | Lawn/turf: 20×8 |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent with manual clutch |
| Front PTO spped | – |
I have a Cub Cadet riding mower (LTX 1040) and was wondering if that is adaptable to pull a riding mower cart? What year was the mower manufactured? The mower has a bagger on it now.
Please reply to: bobbyconant@aol.com
Thank you
I have a LTX and the right rear tire on the inside is full of grease as well as the rim. Has something gone bad or leaking in the gear system or transmission?