Cub Cadet LTX 1046 VT

Cub Cadet LTX 1046 VTThe Cub Cadet LTX 1046 VT is a 2WD lawn tractor from the LTX 1000 series. This tractor was manufactured by the Cub Cadet (a part of MTD) from 2009 to 2010. The Cub Cadet LTX 1046VT is equipped with a 0.7 L V-twin gasoline engine and hydrostatic transmission with Infinite forward and reverse gears.

The Cub Cadet LTX 1046 VT lawn tractor used the Briggs & Stratton 44L777 engine. It is a 0.7 L, 724 cm2, (44.2 cu·in) V-twin natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) of maximum output power.

The Cub Cadet LTX 1046 VT is equipped with the manual sector and pinion steering, disc brakes, open operator station, and 12.5 liters (3.3 US gal.; 2.7 Imp. gal) fuel tank. The LTX 1046VT used mid-mount Cub Cadet 46 in (1,160 mm) mower deck with 2-blades with manual lift.

Cub Cadet LTX1046VT Specifications

General Specifications
Model Cub Cadet LTX 1046 VT
Length 1,750 mm (68.9 in)
Width
Height
Wheel base 1,200 mm (47.2 in)
Weight 232 kg (511 lbs)
Fuel tank capacity 12.5 liters (3.3 US gal.; 2.7 Imp. gal)
Battery 12V, CCA 235A
Cabin type Open operator station
Engine
Engine model Briggs & Stratton 44L777
Engine type Four-stroke, air-cooled, V-twin
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 724 cm2, (44.2 cu·in)
Bore and stroke 79.0 mm X 73.0 mm (3.11 in X 2.87 in)
Horsepower 24.3 PS (17.9 kW; 24.0 HP)/td>
Starter Electric
Oil type SAE 10W-30
Oil capacity: 1.8 L (1.9 US. qt, 1.58 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual sector and pinion
Brakes Disc
Transmission model
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 8.4 kmh (5.2 mph) Reverse: 3.7 (2.3 mph)
Transmission oil capacity 1.9 L (0.5 US. gal, 0.4 Imp. gal.)
Tires
Front tires Lawn/turf: 15×6
Rear tires Lawn/turf: 20×10
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO spped