Cub Cadet LTX 1046 KH

Cub Cadet LTX 1046The Cub Cadet LTX 1046 KH is a 2WD lawn tractor from the LTX 1000 series. This tractor was manufactured by the Cub Cadet (a part of MTD) from 2009 to 2014. The Cub Cadet LTX 1046 is equipped with a 0.7 L V-twin gasoline engine and hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet LTX 1046 KH lawn tractor used the Kohler Courage SV720 engine. It is a 0.7 L, 725 cm2, (44.2 cu·in) V-twin natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke. This engine produced 23.4 PS (17.2 kW; 23.0 HP) of maximum output power.

The Cub Cadet LTX 1046 KH is equipped with the manual sector and pinion steering, disc brakes, open operator station, and 12.5 liters (3.3 US gal.; 2.7 Imp. gal) fuel tank. The LTX 1046 used mid-mount Cub Cadet 46 in (1,160 mm) mower deck with 2-blades with manual lift.

Cub Cadet LTX1046KH Specifications

General Specifications
Model Cub Cadet LTX 1046 KH
Length 1,750 mm (68.9 in)
Width
Height
Wheel base 1,200 mm (47.2 in)
Weight 232 kg (511 lbs)
Fuel tank capacity 12.5 liters (3.3 US gal.; 2.7 Imp. gal)
Battery 12V, CCA 235A
Cabin type Open operator station
Engine
Engine model Kohler Courage SV720
Engine type Four-stroke, air-cooled, V-twin
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 725 cm2, (44.2 cu·in)
Bore and stroke 83.0 mm X 67.0 mm (3.27 in X 2.64 in)
Compression ratio 9.0:1
Horsepower 23.4 PS (17.2 kW; 23.0 HP)
Starter Electric
Oil type SAE 10W-30
Oil capacity: 1.8 L (1.9 US. qt, 1.58 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual sector and pinion
Brakes Disc
Transmission model
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 8.4 kmh (5.2 mph) Reverse: 3.7 (2.3 mph)
Transmission oil capacity 1.9 L (0.5 US. gal, 0.4 Imp. gal.)
Tires
Front tires Lawn/turf: 15×6
Rear tires Lawn/turf: 20×10
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO spped