Cub Cadet LTX 1050 KH

Cub Cadet LTX 1050 KHThe Cub Cadet LTX1050 KH is a 2WD lawn tractor from the LTX 1000 series. This tractor was manufactured by the Cub Cadet (a part of MTD) from 2009 to 2014. The Cub Cadet LTX 1050 KH is equipped with a 0.7 L V-twin gasoline engine and hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet LTX 1050 KH lawn tractor used the Kohler Courage SV725 engine. It is a 0.7 L, 725 cm2, (44.2 cu·in) V-twin natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) of maximum output power.

The Cub Cadet LTX1050 KH is equipped with the manual sector and pinion steering, disc brakes, open operator station, and 12.5 liters (3.3 US gal.; 2.7 Imp. gal) fuel tank. The LTX1050 KH used mid-mount Cub Cadet 50 in (1,270 mm) mower deck with 3-blades with manual lift.

Cub Cadet LTX1050KH Specifications

General Specifications
Model Cub Cadet LTX 1050 KH
Length 1,750 mm (68.9 in)
Width
Height
Wheel base 1,200 mm (47.2 in)
Weight 248 kg (547 lbs)
Fuel tank capacity 12.5 liters (3.3 US gal.; 2.7 Imp. gal)
Battery 12V, CCA 190A
Cabin type Open operator station
Engine
Engine model Kohler Courage SV725
Engine type Four-stroke, air-cooled, V-twin
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 725 cm2, (44.2 cu·in)
Bore and stroke 83.0 mm X 67.0 mm (3.27 in X 2.64 in)
Horsepower 24.3 PS (17.9 kW; 24.0 HP)
Starter Electric
Oil type SAE 10W-40,
Oil capacity: 1.8 L (1.9 US. qt, 1.58 Imp. qt.)
Spark plug Champion RC12YC
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual sector and pinion
Brakes Disc
Transmission model
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 8.4 kmh (5.2 mph) Reverse: 3.7 (2.3 mph)
Transmission oil capacity 2.0 L (0.5 US. gal, 0.4 Imp. gal.)
Tires
Front tires Lawn/turf: 15×6
Rear tires Lawn/turf: 20×10
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO spped