John Deere 3032E (2013-2019)

John Deere 3032E (2013-2019)The John Deere 3032E is a 4WD compact utility tractor manufactured by the John Deere in Augusta, Georgia, USA from 2008 to 2019. The first generation of the JD 3032E was manufactured from 2008 to 2012, and the second generation from 2013 to 2019. The John Deere 3032E utility tractor is equipped with a 1.6 L three-cylinder diesel engine and hydrostatic transmission with Infinite (2-range) forward and reverse gears.

The John Deere 3032E compact utility tractor used the Yanmar 3TNV88C-NJT2 engine. It is a 1.6 L, 1,642 cm2, (100.2 cu·in) three-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 31.1 PS (22.9 kW; 30.7 HP) at 2,500 rpm of gross output power and 105.0 N·m (10.7 kg·m, 77.4 ft·lb) of peak torque.

The John Deere 3032E is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 28.5 liters (7.5 US gal.; 6.3 Imp. gal) fuel tank. This tractor сould be equipped with the John Deere D160 loader.

John Deere 3032E Specifications

General Specifications
Model John Deere 3032E
Length 2,945 mm (115.9 in)
Width 1,440 mm (56.7 in)
Height 2,420 mm (95.3 in)
Wheel base 1,594 mm (62.8 in)
Weight 1,027 kg (2,264 lbs)
Fuel tank capacity 28.5 liters (7.5 US gal.; 6.3 Imp. gal)
Battery 12V, CCA 500A
Cabin type Open operator station with two-post ROPS
Engine
Engine model Yanmar 3TNV88C-NJT2
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.6 L, 1,642 cm2, (100.2 cu·in)
Bore and stroke 88.0 mm X 90.0 mm (3.46 in X 3.54 in)
Compression ratio 19.0:1
Horsepower 31.1 PS (22.9 kW; 30.7 HP) at 2,500 rpm
Torque 105.0 N·m (10.7 kg·m, 77.4 ft·lb)
Starter Electric
Oil capacity: 4.3 L (4.5 US. qt, 3.8 Imp. qt.)
Coolant capacity: 4.9 L (5.2 US. qt, 4.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Wet disc
Final drive Spur gear
Front axle 3.8 liters (4.0 US. qts, 3.3 Imp. qts)
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 20.8 kmh (12.9 mph) Reverse: 20.8 (12.9 mph)
Transmission oil capacity 20.8 L (5.5 US. gal, 4.6 Imp. gal.)
Tires
Front tires Ag: 7.00-14
Lawn/turf: 27×8.5-15
Industrial: 25×8.5-14
Rear tires Ag: 11.2-24
Lawn/turf: 41×14.0-20
Industrial: 15.00-19.5
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 20.8 L (21.98 US. qt, 18.3 Imp. qt.)
Pump flow 5.3 gpm (20.1 lpm)
Steering flow 4.0 gpm (15.1 lpm)
Total flow 9.3 gpm (35.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*