John Deere 3032E (2008-2012)

John Deere 3032E (2008-2012)The John Deere 3032E is a 4WD compact utility tractor manufactured by the John Deere in Augusta, Georgia, USA from 2008 to 2019. The first generation of the JD 3032E was manufactured from 2008 to 2012, and the second generation from 2013 to 2019. The John Deere 3032E is equipped with 1.6 L three-cylinder diesel engine and Hydrostatic transmission with Infinite (2-range) forward and reverse gears.

The John Deere 3032E compact utility tractor used the Yanmar 3TNV88 engine. It is a 1.6 L, 1,642 cm2, (100.2 cu·in) three-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 31.4 PS (23.1 kW; 31.0 HP) at 2,400 rpm of gross output power and 108.0 N·m (11 kg·m, 79.6 ft·lb) of peak torque.

The JD 3032E is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 24.2 liters (6.4 US gal.; 5.3 Imp. gal) fuel tank.

Following attachments are available for the JD 3032E compact utility tractor:

  • John Deere 305 loader
  • John Deere D160 loader

John Deere 3032E Specifications

General Specifications
Model John Deere 3032E
Length 2,810 mm (110.6 in)
Width 1,470 mm (57.9 in)
Height 2,090 mm (82.3 in)
Wheel base 1,520 mm (59.8 in)
Weight 987 kg (2,176 lbs)
Fuel tank capacity 24.2 liters (6.4 US gal.; 5.3 Imp. gal)
Battery 12V, CCA 500A, Size 22NF
Cabin type Open operator station with two-post ROPS
Engine
Engine model Yanmar 3TNV88
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.6 L, 1,642 cm2, (100.2 cu·in)
Bore and stroke 88.0 mm X 90.0 mm (3.46 in X 3.54 in)
Compression ratio 19.0:1
Horsepower 31.4 PS (23.1 kW; 31 HP) at 2,400 rpm
Torque 108.0 N·m (11 kg·m, 79.6 ft·lb)
Starter Electric
Oil capacity: 4.5 L (4.8 US. qt, 4 Imp. qt.)
Coolant capacity: 4.2 L (4.4 US. qt, 3.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Wet disc
Front axle 3.8 liters (4.0 US. qts, 3.3 Imp. qts)
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 20.0 kmh (12.4 mph) Reverse: 20.0 (12.4 mph)
Transmission oil capacity 21.0 L (5.5 US. gal, 4.6 Imp. gal.)
Tires
Front tires Ag: 7.00-14
Lawn/turf: 27×8.5-15
Industrial: 25×8.5-14
Rear tires Ag: 11.2-24
Lawn/turf: 41×14.0-20
Industrial: 15.00-19.5
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 21.0 L (22.19 US. qt, 18.48 Imp. qt.)
Pressure 2,500 psi (172.4 bar)
Pump flow 5.3 gpm (20.1 lpm)
Steering flow 4.0 gpm (15.1 lpm)
Total flow 9.3 gpm (35.2 lpm)