John Deere 950

John Deere 950The John Deere 950 is a 2WD or 4WD compact utility tractor from the 50 Compact series. This tractor was manufactured by the Yanmar for John Deere from 1978 to 1989. The JD 950 is equipped with 1.7 L three-cylinder diesel engine and gear type transmission with dry disc clutch and 8 forward and 2 reverse gears.

The John Deere 950 compact utility tractor used the 3T90-J engine. It is a 1.7 L, 1721 cm2, (105.0 cu·in) three-cylinder natural aspirated diesel engine with 90.0 mm (3.54 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 31.4 PS (23.1 kW; 31.0 HP) at 2,400 rpm of maximum output power.

The JD 950 is equipped with manual or power (optional) steering, differential mechanical expanding shoe brakes, open operator station with two-post ROPS and 32.0 liters (8.5 US gal.; 7 Imp. gal) fuel tank.

Following attachments are available for John Deere 950 compact utility tractor:

  • Mid-mount John Deere 172: 72 in (1,820 mm) mower deck
  • Front-mount John Deere 423: 72 in (1,820 mm) blade
  • John Deere 80 loader
  • John Deere 8A backhoe

John Deere 950 Specifications

General Specifications
ModelJohn Deere 950
Length3,090 mm (121.7 in)
Width1,350 mm (53.1 in)
Height1,340 mm (52.8 in)
Wheel base1,750 mm (68.9 in)
Weight1,250 kg (2,755 lbs)
Fuel tank capacity32.0 liters (8.5 US gal.; 7 Imp. gal)
Cabin typeOpen operator station with two-post ROPS
Engine model3T90-J
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement1.7 L, 1,721 cm2, (105.0 cu·in)
Bore and stroke90.0 mm X 90.0 mm (3.54 in X 3.54 in)
Horsepower31.4 PS (23.1 kW; 31.0 HP) at 2,400 rpm
Coolant capacity:6.2 L (6.55 US. qt, 5.46 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeManual or power (optional)
BrakesDifferential mechanical expanding shoe
Transmission model
Transmission typeGear type with dry disc clutch
Gears8 forward and 2 reverse
Speed Forward: 19.5 kmh (12.1 mph) Reverse: 8.8 (5.5 mph)
Front tiresAg: 5.00-15
Rear tiresAg: 11.2-24, 12.4-28
Three-Point Hitch
Control type
Lift capacity
PTO (Power take-off shaft)
Rear PTO typeTransmission or live (two-stage clutch)
Rear PTO spped540 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity18.0 L (19.02 US. qt, 15.84 Imp. qt.) or 20.0 L (21.13 US. qt, 17.6 Imp. qt.)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.


Leave a Reply

Your email address will not be published.