Massey Ferguson 275 Xtra (2WD or 4WD) tractor: review and specs

The Massey Ferguson 275 Xtra is a two-wheel or four-wheel tractor, manufactured under Massey Ferguson brand. The Massey Ferguson 275 Xtra tractor is equipped with Simpson S440 (4.0 L, 244 cu.in.) diesel engine and two transmission options: Sliding Spur transmission with 8 forward and 2 reverse or Synchromesh transmission with 12 forward and 4 reverse.

The 275 Xtra tractor used a four-cylinder naturally-aspirated liquid-cooled direct injection diesel engine Simpson S440, with 100 mm (3.94 in) of the cylinder bore and 127 mm (5 in) of the piston stroke. The Simpson S440 engine produced 75 PS (55 kW; 74 HP) at 2,200 rpm of output power and 88 Nm (29.4 kg·m; 212.5 ft·lb) at 1,400 rpm of torque. The engine used an oil-bath with a pre-cleaner air cleaner

The Massey Ferguson 275 Xtra used hydrostatic power-assisted steering, mechanical differential, and oil immersed mechanical actuated brakes. The Massey Ferguson 275 Xtra used open operator station.

Massey Ferguson 275 Xtra specifications

General Specifications
Model	Massey Ferguson 275 Xtra
Length	3,890 mm (153.1 in.)
Width	–
Height	2,520 mm (99.2 in.)
Wheelbase	2,290 mm (90.2 in.)
Ground clearance	–
Weight (operating)	2WD 2,780 kg (6128 lb.) 4WD 2,950 kg (6503 lb.)
Fuel tank capacity	70 l (18.5 Gal.)
Battery	12V

Engine
Engine model	Simpson S440
Number of Cylinders	4
Firing order	–
Fuel	Diesel
Displacement	4.0 L, (244 cu.in.)
Bore x stroke	100 x 127 mm (3.94 x 5.0 in)
Power output	75 PS (55 kW; 74 HP) at 2,200 rpm
Torque	88 Nm (29.4 kg·m; 212.5 ft·lb) at 1,400 rpm
Starter type	Electric starter
Oil type	–

Tires size
Front tires	2WD7.50-16 4WD12.4-24
Rear tires	18.4-30

Transmission and chassis
Chassis	4×2 2WD or 4×4 4WD
Steering	Hydrostatic
Sliding Spur transmission
Transmission type	Sliding gear
Gears	8 forward and 2 reverse
Sinchromesh transmission
Transmission type	Sinchromesh
Gears	12 forward and 4 reverse
PTO (Power take-off shaft)
PTO Type:	Rear, live type
PTO Speed:	540 rpm
Hydraulic lift
3-point linkage:	Category II
Control system:	–
No. of remote valves:	–
Max lifting capacity (at link end):	2,050 kg (4519 lb.)
Hydraulic system
Type	Ferguson system
Max oil flow	18.0 lpm
Pressure	176 bar

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.