The Massey Ferguson 1010 is a 2WD/4WD compact utility tractor manufactured by the Toyosha for distributor Massey Ferguson from 1982 to 1994. The Massey Ferguson 1010 is equipped with a 0.9 L three-cylinder diesel engine and one of two transmissions: constant mesh transmission with dry disc clutch and 6 forward and 2 reverse gears or hydrostatic transmission with infinite forward and reverse.
The Massey Ferguson 1010 compact utility tractor used the Toyosha engine. It is a 0.9 L, 865 cm2, (52.8 cu·in) three-cylinder natural aspirated diesel engine with 70.0 mm (2.76 in) of the cylinder bore and 75.0 mm (2.95 in) of the piston stroke. This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 2,500 rpm of maximum output power.
The MF 1010 is equipped with manual steering, mechanical drum brakes, open operator station, ROPS (optional) and 14.0 liters (3.7 US gal.; 3.1 Imp. gal) fuel tank.
Following attachments are available for the Massey Ferguson 1010 compact utility tractor:
- Mid-mount Massey Ferguson 1019 54 in (1,370 mm) mower deck
- Mid-mount Massey Ferguson 1023 54 in (1,370 mm) mower deck
- Front-mount Massey Ferguson 1026 60 in (1,520 mm) blade
- Massey Ferguson 1014 loader
The MF 1010 variants:
- 1010-2: 2WD with gear transmission
- 1010-4: 4WD with gear transmission
- 1010H-2: 2WD with hydro transmission
- 1010H-4: 4WD with hydro transmission
Massey Ferguson 1010 Specifications
| General Specifications | |
| Model | Massey Ferguson 1010 |
| Length |
Gear: 2,150 mm (84.6 in) Hydro: 2,300 mm (90.7 in) |
| Width | 1,060 mm (41.7 in) |
| Height | 1,170 mm (46.1 in) |
| Wheel base |
Gear: 1,290 mm (50.8 in) Hydro: 1,390 mm (55.1 in) |
| Weight |
2WD: 645 kg (1,422 lbs) 4WD Gear: 730 kg (1,610 lbs) 4WD Hydro: 907 kg (2,000 lbs) |
| Fuel tank capacity | 14.0 liters (3.7 US gal.; 3.1 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station, ROPS (optional) |
| Engine | |
| Engine model | Toyosha |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 0.9 L, 865 cm2, (52.8 cu·in) |
| Bore and stroke | 70.0 mm X 75.0 mm (2.76 in X 2.95 in) |
| Horsepower | 16.2 PS (11.9 kW; 16.0 HP) at 2,500 rpm |
| Starter | Electric |
| Oil capacity: | 2.7 L (2.9 US. qt, 2.4 Imp. qt.) |
| Coolant capacity: | 3.5 L (3.7 US. qt, 3.1 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Manual |
| Brakes | Mechanical drum |
| Differential lock | Mechanical |
| Transmission model | – |
| Transmission type | Constant mesh with dry disc clutch |
| Gears | 6 forward and 2 reverse |
| Transmission oil capacity | 17.0 L (4.5 US. gal, 3.7 Imp. gal.) |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite forward and reverse |
| Transmission oil capacity | 17.0 L (4.5 US. gal, 3.7 Imp. gal.) |
| Tires | |
| Front tires | Ag: 4.50-10 (2WD), 5.00-12 (4WD) |
| Rear tires | Ag: 8-16 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at ends) | 550 kg (1,213 lbs) |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent with electric clutch (option) |
| Front PTO spped | – |
| Middle PTO type | – |
| Middle PTO spped | 2114 rpm |
| Rear PTO type | Transmission with overrunning clutch |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 1 (optional) |
| Pump flow | 3.5 gpm (13.2 lpm) |
I need to replace my rear PTO shaft bearing on a Massey Ferguson 1010 can the shaft be removed out from the back cover plate ? The cover plate has the shaft with a seal and then also covers the upper bearing