Massey Ferguson 1135

Massey Ferguson 1135The Massey Ferguson 1135 is a 2WD row-crop tractor manufactured by in from 1973 to 1978. The MF 1135 is equipped with a 5.8 L (354.0 cu·in) six-cylinder diesel engine and a two-speed power shift transmission with 12 forward and 4 reverse gears and dry disc clutch.

The Massey Ferguson 1135 row-crop tractor used the Perkins AT6.354 engine. It is a 5.8 L, 5,801 cm2, (354.0 cu·in) six-cylinder turbocharged diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 122.7 PS (90.2 kW; 121.0 HP) at 2,200 rpm of output power.

The Massey Ferguson 1135 is equipped with hydrostatic power steering, hydraulic disc brakes, open operator station or cab (optional) and 208.2 liters (55 US gal.; 45.8 Imp. gal) fuel tank.

Following attachments are available for the Massey Ferguson 1135 row-crop tractor:

  • Massey Ferguson 245 loader
  • Massey Ferguson 245 High Lift loader

Massey Ferguson 1135 Specifications

General Specifications
Model Massey Ferguson 1135
Length 4,570 mm (179.9 in)
Width
Height (steering wheel) 2,000 mm (78.7 in)
Wheel base 2,770 mm (109.1 in)
Ground clearance (drawbar) 400 mm (15.7 in)
Weight (operating) 6,150 kg (13,558 lbs)
Fuel tank capacity 208.2 liters (55 US gal.; 45.8 Imp. gal)
Battery Two 12V, 96Ah
Cabin type Open operator station or Cab (optional)
Engine
Engine model Perkins AT6.354
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.8 L, 5,801 cm2, (354.0 cu·in)
Bore and stroke 98.0 mm X 127.0 mm (3.86 in X 5 in)
Horsepower 122.7 PS (90.2 kW; 121.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 15.1 L (16 US. qt, 13.3 Imp. qt.)
Coolant capacity: 21.0 L (22.2 US. qt, 18.5 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Hydrostatic power
Brakes Hydraulic disc
Transmission model Multi-Power
Transmission type Two-speed power shift with dry disc clutch
Gears 12 forward and 4 reverse
Speed Forward: 26.9 kmh (16.7 mph) Reverse: 10.3 (6.4 mph)
Tires
Front tires Ag: 11.00-16
Rear tires Ag: 18.4-38
Three-Point Hitch
Category III/II
Control type Position and draft control
Lift capacity (at ends) 2,425 kg (5,345 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540, 1000 rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 83.3 L (22 US. gal, 18.3 Imp. gal.)
Pressure 2100 psi (144.8 bar)
Valves 1
Pump flow 20.0 gpm (75.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*