Massey Ferguson 1225

Massey Ferguson 1225The Massey Ferguson 1225 is a 2WD/4WD compact utility tractor from the series. This tractor was manufactured by Iseki for distributor Massey Ferguson from 1999 to 2002. The Massey Ferguson 1225 is equipped with a 1.1 L (68.5 cu·in) three-cylinder diesel engine and one of two transmissions: a gear type transmission with 6 forward and 2 reverse gears or a hydrostatic transmission with infinite (2-range) forward and reverse gears.

The Massey Ferguson 1225 compact utility tractor used the Iseki E3112 engine. It is a 1.1 L, 1,122 cm2, (68.5 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. The compression ratio rating is 22.5:1. This engine produced 24.6 PS (18.1 kW; 24.3 HP) at 2,800 rpm of output power.

The Massey Ferguson 1225 is equipped with power steering, mechanical dry shoe brakes, two-post ROPS, and 23.1 liters (6.1 US gal.; 5.1 Imp. gal) fuel tank.

Massey Ferguson 1225 Specifications

General Specifications
ModelMassey Ferguson 1225
Length2,310 mm (90.9 in)
Width1,040 mm (40.9 in)
Height (ROPS)1,910 mm (75.2 in)
Wheel base1,510 mm (59.4 in)
Ground clearance270 mm (10.6 in)
Weight (shipping) 2WD gear: 620 kg (1,367 lbs)
4WD hydro: 680 kg (1,499 lbs)
Fuel tank capacity23.1 liters (6.1 US gal.; 5.1 Imp. gal)
Battery12V, CCA 450A
Cabin typeTwo-post ROPS
Engine modelIseki E3112
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement1.1 L, 1,122 cm2, (68.5 cu·in)
Bore and stroke78.0 mm X 78.0 mm (3.07 in X 3.07 in)
Compression ratio22.5:1
Horsepower24.6 PS (18.1 kW; 24.3 HP) at 2,800 rpm
Torque67.0 N·m (6.8 kg·m, 49.4 ft·lb) at 2,000 rpm
Oil capacity:2.7 L (2.9 US. qt, 2.4 Imp. qt.)
Coolant capacity:7.1 L (7.5 US. qt, 6.2 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesMechanical dry shoe
Final driveOutboard planetary
Transmission model
Transmission typeGear type with dry disc clutch
Gears6 forward and 2 reverse
Transmission model
Transmission typeHydrostatic
GearsInfinite (2-range) forward and reverse
Speed Forward: 21.6 kmh (13.4 mph) Reverse: 16.1 kmh (10 mph)
Front tires Ag: 5.00-12 (2WD), 6-12 (4WD)
Rear tires Ag: 9.5-16
Three-Point Hitch
Control typePosition control
Lift capacity (at ends)550 kg (1,213 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO speed2000 rpm
Rear PTO typeTransmission (gear) or independent (hydro)
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity14.0 L (3.7 US. gal, 3.1 Imp. gal.)
Pressure1,990 psi (137.2 bar)
Pump flow2.6 gpm (9.8 lpm)
Steering flow2.7 gpm (10.2 lpm)
Total flow5.3 gpm (20.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.