Massey Ferguson 158

Massey Ferguson 158The Massey Ferguson 158 is a 2WD row-crop tractor manufactured by Massey Ferguson in from 1972 to 1976. The Massey Ferguson 158 is equipped with a 3.3 L (203.5 cu·in) four-cylinder diesel engine and one of two transmissions: a unsynchronized gear transmission with 12 forward and 4 reverse gears or a transmission with 8 forward and 2 reverse gears.

The MF 158 row-crop tractor used the Perkins AD4.203 engine. It is a 3.3 L, 3,335 cm2, (203.5 cu·in) four-cylinder natural aspirated diesel engine with 91.5 mm (3.6 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 62.8 PS (46.2 kW; 62.0 HP) at 2,000 rpm of output power and 218 N·m (22.2 kg·m, 160.7 ft·lb) at 1,230 rpm of torque.

The Massey Ferguson 158 is equipped with manual steering, disc brakes, open operator station, and 68.2 liters (18 US gal.; 15 Imp. gal) fuel tank.

Massey Ferguson 158 Specifications

General Specifications
Model Massey Ferguson 158
Length 3,510 mm (138.2 in)
Width
Height 1,620 mm (63.8 in)
Wheel base 2,140 mm (84.3 in)
Weight 2,460 kg (5,423 lbs)
Fuel tank capacity 68.2 liters (18 US gal.; 15 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model Perkins AD4.203
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.3 L, 3,335 cm2, (203.5 cu·in)
Bore and stroke 91.5 mm X 127.0 mm (3.6 in X 5 in)
Horsepower 62.8 PS (46.2 kW; 62.0 HP) at 2,000 rpm
Torque 218 N·m (22.2 kg·m, 160.7 ft·lb) at 1,230 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Disc
Transmission model
Transmission type Unsynchronized gear
Gears 12 forward and 4 reverse
Speed Forward: 25.0 kmh (15.5 mph) Reverse: (0 mph)
Transmission model
Transmission type
Gears 8 forward and 2 reverse
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 16.9-28
Three-Point Hitch
Caterogy II
Control type Mechanical
Lift capacity (at ends) 1,880 kg (4,145 lbs)
PTO (Power take-off shaft)
Rear PTO type Live
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type
Pressure 2550 psi (175.8 bar)
Pump flow 14.1 gpm (53.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*