Massey Ferguson 8480

Massey Ferguson 8480The Massey Ferguson 8480 is a 4WD row-crop tractor from the 8400 series. This tractor was manufactured by Massey Ferguson in France from 2004 to 2007. The Massey Ferguson 8480 is equipped with an 8.4 L (513.0 cu·in) six-cylinder diesel engine and one of two transmissions: the DynaStep transmission with 21 forward and 18 reverse gears or the Dyna-VT transmission with infinite forward and reverse gears.

The MF 8480 row-crop tractor used the Sisu Diesel engine. It is a 8.4 L, 8,407 cm2, (514.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 145.0 mm (5.71 in) of the piston stroke. The compression ratio rating is 17.5:1. This engine produced 294.2 PS (216.3 kW; 290.0 HP) at 2,200 rpm of output power.

The Massey Ferguson 8480 is equipped with hydrostatic power steering, independent hydraulic wet disc brakes, Cab standard, and 600.0 liters (158.5 US gal.; 132.0 Imp. gal) fuel tank.

Massey Ferguson 8480 Specifications

General Specifications
Model Massey Ferguson 8480
Length 5,230 mm (205.9 in)
Width –
Height 3,090 mm (121.7 in)
Wheel base 3,070 mm (120.9 in)
Weight 9,240 kg (20,371 lbs)
Fuel tank capacity 600.0 liters (158.5 US gal.; 132 Imp. gal)
Battery 12V
Cabin type Cab standard
Engine
Engine model Sisu Diesel
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.4 L, 8,407 cm2, (514.0 cu·in)
Bore and stroke 111.0 mm X 145.0 mm (4.37 in X 5.71 in)
Compression ratio 17.5:1
Horsepower 294.2 PS (216.3 kW; 290.0 HP) at 2,200 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Independent hydraulic wet disc
Transmission model DynaStep
Transmission type –
Gears 21 forward and 18 reverse
Transmission model Dyna-VT
Transmission type Continuously variable transmission
Gears Infinite forward and reverse
Tires
Front tires Ag: 16.9R30
Rear tires Ag: 18.4R46
Three-Point Hitch
Caterogy III
Control type –
Lift capacity (at 610 mm / 24 in) 6,530 kg (14,400 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
540E/1,000 rpm (optional)
Hydraulic system
Hydraulic type Closed center pressure flow compensated (PFC)
Pressure 2900 psi (199.9 bar)
Valves 4 or 5
Total flow 39.0 gpm (147.6 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*