New Holland Boomer TZ25DA

New Holland Boomer TZ25DAThe New Holland Boomer TZ25DA is a 4WD sub-compact utility tractor from the Boomer TZ series. This tractor was manufactured by New Holland from 2005 to 2008. The New Holland Boomer TZ25DA is equipped with a 1.0 L (61.3 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.

The New Holland Boomer TZ25DA sub-compact utility tractor used the Shibaura S773 engine. It is a 1.0 L, 1,004 cm2, (61.3 cu·in) three-cylinder natural aspirated diesel engine with 77.0 mm (3.03 in) of the cylinder bore and 72.0 mm (2.83 in) of the piston stroke. This engine produced 25.3 PS (18.6 kW; 25.0 HP) at 3,000 rpm of output power.

The New Holland Boomer TZ25DA is equipped with power steering, wet disc brakes, two-post ROPS, and 29.9 liters (7.9 US gal.; 6.6 Imp. gal) fuel tank.

Following attachments are available for the New Holland Boomer TZ25DA sub-compact utility tractor:

  • Mid-mount New Holland 54CMS: 1,370 mm (54 in) mower deck with 3-blades
  • Mid-mount New Holland 60CMS: 1,520 mm (60 in) mower deck with 3-blades
  • New Holland 12LA loader

New Holland Boomer TZ25DA Specifications

General Specifications
ModelNew Holland Boomer TZ25DA
Length2,440 mm (96.1 in)
Width1,160 mm (45.7 in)
Height (ROPS)2,280 mm (89.8 in)
Wheel base1,390 mm (54.7 in)
Weight598 kg (1,318 lbs)
Fuel tank capacity29.9 liters (7.9 US gal.; 6.6 Imp. gal)
Battery12V, CCA 325A
Cabin typeTwo-post ROPS
Engine modelShibaura S773
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement1.0 L, 1,004 cm2, (61.3 cu·in)
Bore and stroke77.0 mm X 72.0 mm (3.03 in X 2.83 in)
Horsepower25.3 PS (18.6 kW; 25.0 HP) at 3,000 rpm
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typePower
BrakesWet disc
Transmission model
Transmission typeHydrostatic
GearsInfinite (2-range) forward and reverse
Front tires Industrial: 18×8.50-8
Rear tires Industrial: 26×12.00-12
Three-Point Hitch
Control type
Lift capacity (at ends)317 kg (699 lbs)
PTO (Power take-off shaft)
Middle PTO typeStandard
Middle PTO speed2,200 rpm
Rear PTO typeIndependent
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Pump flow3.9 gpm (14.8 lpm)
Steering flow1.9 gpm (7.2 lpm)
Total flow5.8 gpm (22 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.