New Holland T4.100 (2012-2014)

New Holland T4.100The New Holland T4.100 is a 2WD/4WD utility tractor from the T4 PowerStar series. This tractor was manufactured by New Holland from 2012 to 2014. The New Holland T4.100 is equipped with a 3.2 L (195.0 cu·in) four-cylinder diesel engine and one of three transmissions: a partially synchronized mechanical shuttle transmission with 8 forward and 8 reverse gears, a mechanical shuttle transmission with 12 forward and 12 reverse gears or a power shuttle transmission with 12 forward and 12 reverse gears.

The New Holland T4.100 utility tractor used the FPT engine. It is a 3.2 L, 3,195 cm2, (195.0 cu·in) four-cylinder turbocharged intercooled diesel engine with 99.0 mm (3.9 in) of the cylinder bore and 104.0 mm (4.09 in) of the piston stroke. This engine produced 95.3 PS (70.1 kW; 94.0 HP) at 2,300 rpm of output power.

The NH T4.100 is equipped with hydrostatic power steering, hydraulic wet disc brakes, Two-post foldable ROPS or Cab (optional) and 90.1 liters (23.8 US gal.; 19.8 Imp. gal) fuel tank.

New Holland T4.100 Specifications

General Specifications
ModelNew Holland T4.100
Fuel tank capacity90.1 liters (23.8 US gal.; 19.8 Imp. gal)
Battery12V, CCA 730A (ROPS), 800A (cab)
Cabin typeTwo-post foldable ROPS or Cab (optional)
Engine modelFPT
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement3.2 L, 3,195 cm2, (195.0 cu·in)
Bore and stroke99.0 mm X 104.0 mm (3.9 in X 4.09 in)
Horsepower95.3 PS (70.1 kW; 94 HP) at 2,300 rpm
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesHydraulic wet disc
Differential lockMechanical differential lock
Transmission model
Transmission typePartially synchronized mechanical shuttle
Gears8 forward and 8 reverse
Transmission model
Transmission typeMechanical shuttle
Gears12 forward and 12 reverse
Transmission model
Transmission typePower shuttle
Gears12 forward and 12 reverse
Front tires Ag: –
Rear tires Ag: –
Three-Point Hitch
Control typeMechanical upper-link draft sensing
Lift capacity (at 610 mm/24 in)2,100 kg (4,630 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540 (1.375), 540/540E rpm
Hydraulic system
Hydraulic typeOpen center
Valves Rear: 1 or 2
Mid: 0 or 2
Pump flow12.5 gpm (47.3 lpm)
Steering flow7.3 gpm (27.6 lpm)
Total flow19.8 gpm (75 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.