The New Holland TN55 is a 2WD or 4WD utility tractor from the TN series. This tractor was manufactured by New Holland in Jesi, Italy from 1999 to 2004. The NH TN55 is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and one of four transmission varians.
The New Holland TN55 utility tractor used the Iveco 8035 engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder natural aspirated diesel engine with 104.0 mm (4.09 in) of the cylinder bore and 115.0 mm (4.53 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 53.7 PS (39.5 kW; 53.0 HP) at 2,300 rpm of output power and 200.7 N·m (20.5 kg·m, 147.9 ft·lb) at 1,400 rpm of torque.
The New Holland TN55 is equipped with power steering, differential hydraulic wet disc brakes, two-post folding ROPS or cab (optional), and 65.5 liters (17.3 US gal.; 14.4 Imp. gal) fuel tank.
Following attachments are available for the New Holland TN55 utility tractor:
- New Holland 32LA loader
- New Holland 32LA MSL loader
- New Holland 33LA loader
- New Holland 33LA MSL loader
New Holland TN55 variants:
- TN55: ROPS
- TN55D: Cab
- TN55S: SuperSteer
New Holland TN55 Specifications
| General Specifications | |
| Model | New Holland TN55 |
| Length | 3,930 mm (154.7 in) |
| Width | 1,700 mm (66.9 in) |
| Height | ROPS: 2,410 mm (94.9 in) Cab: 2,300 mm (90.6 in) |
| Wheel base | 2WD ROPS: 2,070 mm (81.5 in) 4WD ROPS: 2,000 mm (78.7 in) 2WD Cab: 2,130 mm (83.9 in) 4WD Cab: 2,060 mm (81.3 in) 4WD SuperSteer: 2,370 mm (93.5 in) |
| Weight (shipping) | 2WD ROPS: 2,070 kg (4,564 lbs) 4WD ROPS: 2,285 kg (5,038 lbs) 2WD Cab: 2,235 kg (4,930 lbs) 4WD Cab: 2,510 kg (5,530 lbs) 2WD SuperSteer: 2,375 kg (5,235 lbs) 4WD SuperSteer: 2,575 kg (5,675 lbs) |
| Fuel tank capacity | 65.5 liters (17.3 US gal.; 14.4 Imp. gal) |
| Battery | 12V, CCA 730A |
| Cabin type | Two-post folding ROPS or Cab (optional) |
| Engine | |
| Engine model | Iveco 8035 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
| Bore and stroke | 104.0 mm X 115.0 mm (4.09 in X 4.53 in) |
| Compression ratio | 18.0:1 |
| Horsepower | 53.7 PS (39.5 kW; 53 HP) at 2,300 rpm |
| Torque | 200.7 N·m (20.5 kg·m, 147.9 ft·lb) at 1,400 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Differential hydraulic wet disc |
| Final drive | Planetary |
| Transmission model | – |
| Transmission type | Gear type with dry disc clutch |
| Gears | 8 forward and 8 reverse |
| Speed | Forward: 30.3 kmh (18.8 mph) Reverse: kmh (0 mph) |
| Transmission model | Synchro Command |
| Transmission type | Partially synchronized with dry disc clutch (mechanical shuttle) wet disc (power shuttle) |
| Gears | 8 forward and 8 reverse |
| Speed | Forward: 30.3 kmh (18.8 mph) Reverse: kmh (0 mph) |
| Transmission model | Synchro Command Plus |
| Transmission type | Partially synchronized |
| Gears | 16 forward and 16 reverse |
| Tires | |
| Front tires | Ag: 7.50-16 (2WD), 8.3-24 (4WD) |
| Rear tires | Ag: 14.9-28 |
| Three-Point Hitch | |
| Category | II |
| Control type | – |
| Lift capacity (at ends) | 1,797 kg (3,962 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with dry disc clutch |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 42.0 L (11.1 US. gal, 9.2 Imp. gal.) |
| Pressure | 2755 psi (189.9 bar) |
| Valves | 1 or 2 |
| Pump flow | 12.4 gpm (46.9 lpm) 16.9 gpm (64.0 lpm) |
| Steering flow | 7.2 gpm (27.3 lpm) 9.2 gpm (34.8 lpm) |
Be the first to comment