New Holland Workmaster 33

New Holland Workmaster 33The New Holland Workmaster 33 is a 4WD compact utility tractor from the Workmaster series. This tractor was manufactured by New Holland (a part of CNH) from 2015 to 2016. The New Holland Workmaster 33 is equipped with a 1.5 L (91.2 cu·in) three-cylinder diesel engine and one of two transmissions: a synchronized shuttle transmission with 12 forward and 12 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The NH Workmaster 33 compact utility tractor used the Shibaura N843T-F-24 engine. It is a 1.5 L, 1,495 cm2, (91.2 cu·in) three-cylinder turbocharged diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 32.6 PS (24.0 kW; 32.2 HP) at 2,600 rpm of output power.

The New Holland Workmaster 33 is equipped with power steering, wet disc brakes, two-post folding ROPS and 28.0 liters (7.4 US gal.; 6.2 Imp. gal) fuel tank.

New Holland Workmaster 33 Specifications

General Specifications
Model New Holland Workmaster 33
Length 3,070 mm (120.9 in)
Width 1,680 mm (66.1 in)
Height (ROPS) 2,220 mm (87.4 in)
Wheel base 1,710 mm (67.3 in)
Weight 1,390 kg (3,064 lbs)
Fuel tank capacity 28.0 liters (7.4 US gal.; 6.2 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS
Engine
Engine model Shibaura N843T-F-24
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.5 L, 1,495 cm2, (91.2 cu·in)
Bore and stroke 84.0 mm X 90.0 mm (3.31 in X 3.54 in)
Horsepower 32.6 PS (24.0 kW; 32.2 HP) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Final drive Inboard planetary
Transmission model
Transmission type Synchronized shuttle
Gears 12 forward and 12 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Tires
Front tires Ag: 7×14
Lawn/turf: 25×8.50-14
Industrial: 25×8.5-14
Rear tires Ag: 11.2×24
Lawn/turf: 41×14.00-20
Industrial: 43×16.00-20
Three-Point Hitch
Category I
Control type Position control
Lift capacity (at ends) 820 kg (1,810 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1 or 2
Pump flow 8.2 gpm (31 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*