The New Holland Workmaster 70 is a 2WD to 4WD utility tractor from the Workmaster series. This tractor has been manufactured by New Holland (a part of CNH) since 2015. The New Holland Workmaster 70 is equipped with a 2.2 L (136.0 cu·in) three-cylinder diesel engine and a synchronized shuttle transmission with 8 forward and 8 reverse gears.
The New Holland Workmaster 70 utility tractor used the FPT R753 engine. It is a 2.2 L, 2,228 cm2, (136.0 cu·in) three-cylinder turbocharged diesel engine with 94.0 mm (3.7 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. This engine produced 71 PS (52.2 kW; 70.0 HP) at 2,600 rpm of output power.
The New Holland Workmaster 70 is equipped with power steering, wet disc type brakes, two-post folding ROPS, and 52.0 liters (13.7 US gal.; 11.4 Imp. gal) fuel tank.
Following attachments are available for the New Holland Workmaster 70 utility tractor:
- New Holland 611TL loader
- New Holland 616TL loader
- New Holland 621TL loader
- New Holland 626TL loader
- New Holland 935GHB backhoe
New Holland Workmaster 70 Specifications
| General Specifications | |
| Model | New Holland Workmaster 70 |
| Length | 2WD: 3,280 mm (129.1 in) 4WD: 3,400 mm (134.0 in) |
| Width | 1,960 mm (77.2 in) |
| Height | 2,470 mm (97.2 in) |
| Wheel base | 2WD: 2,440 mm (244.0 in) 4WD: 2,470 mm (247.0 in) |
| Weight | 2WD: 2,015 kg (4,440 lbs) 4WD: 2,295 kg (5,060 lbs) |
| Fuel tank capacity | 52.0 liters (13.7 US gal.; 11.4 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post folding ROPS |
| Engine | |
| Engine model | FPT R753 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.2 L, 2,228 cm2, (136.0 cu·in) |
| Bore and stroke | 94.0 mm X 107.0 mm (3.7 in X 4.21 in) |
| Horsepower | 71 PS (52.2 kW; 70.0 HP) at 2,600 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc type |
| Transmission model | – |
| Transmission type | Synchronized shuttle |
| Gears | 8 forward and 8 reverse |
| Tires | |
| Front tires | Ag: 7.5×16 (2WD), 8.3×24 (4WD) |
| Rear tires | Ag: 13.6×28 |
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | Position and draft control |
| Lift capacity (at ends) | 1,500 kg (3,310 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with mechanical clutch |
| Rear PTO speed | 540, 540/540E rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 1 or 2 |
| Pump flow | 12.0 gpm (45.4 lpm) |
| Steering flow | 5.5 gpm (20.8 lpm) |
| Total flow | 17.5 gpm (66.2 lpm) |
Be the first to comment