New Holland T5050

New Holland T5050The New Holland T5050 is a 2WD or 4WD utility tractor from the T5000 series. This tractor was manufactured by New Holland in Jesi, Italy from 2008 to 2013. The New Holland T5050 is equipped with 4.5 L four-cylinder diesel engine.

The New Holland T5050 utility tractor used the New Holland engine. It is a 4.5 L, 4,490 cm2, (274.0 cu·in) four-cylinder turbocharged intercooled diesel engine. This engine produced 96.3 PS (70.8 kW; 95.0 HP) at 2,300 rpm of maximum output power.

The New Holland T5050 is equipped with hydrostatic power steering, hydraulic wet disc brakes, rear mechanical or front and rear electrohydraulic (optional) differential lock, flat deck platform with ROPS or cab with heat and air-conditioning (optional) and 127 liters (33.5 US gal.; 27.9 Imp. gal) fuel tank.

Following attachments are available for New Holland T5050 utility tractor:

  • New Holland 820 loader
  • New Holland 830 loader

New Holland T5050 Specifications

General Specifications
Model New Holland T5050
Length2,340 mm (92.1 in)
Width
Height2,560 mm (100.8 in)
Wheel base2,340 mm (92.1 in)
Weight
Fuel tank capacity127 liters (33.5 US gal.; 27.9 Imp. gal)
Battery12V CCA: 960A
Cabin typeFlat deck platform with ROPS. Cab with heat and air-conditioning (optional)
Engine
Engine modelNew Holland
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement4.5 L, 4,490 cm2 (274.0 cu·in)
Bore and stroke
Horsepower96.3 PS (70.8 kW; 95.0 HP) at 2,300 rpm
StarterElectric
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesHydraulic wet disc
Differential lockMechanical rear or electrohydraulic front and rear (optional)
Transmission model
Transmission typeMechanical shuttle
Gears12 forward and 12 reverse
Transmission model
Transmission typeMechanical shuttle
Gears20 forward and 12 reverse
Transmission model
Transmission typePower shuttle
Gears12 forward and 12 reverse
Transmission modelDual Command
Transmission typePower shuttle
Gears24 forward and 24 reverse
Tires
Front tires
Rear tires
Three-Point Hitch
CaterogyII
Control typeMechanical lower-link draft sensing
Lift capacity2,480 kg (5,468 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent with mechanical or electrohydraulic clutch
Rear PTO spped540/1,000 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure2,880 psi (199 bar)
Valves2 to 3
Pump flow16.1 gpm (60.9 lpm)
Steering flow10.4 gpm (39.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*