John Deere 8560

John Deere 8560he John Deere 8560 is a four-wheel drive tractor from the 8060 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1989 to 1993. The John Deere 8560 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partially synchronized transmission with 12 forward and 3 reverse gears or a partial power shift transmission with 24 forward and 6 reverse gears.

The JD 8560 four-wheel drive used the John Deere engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 238.3 PS (175.2 kW; 235.0 HP) at 2,100 rpm of output power.

The John Deere 8560 is equipped with articulated power steering, hydraulic wet disc brakes, Sound-Gard cab and 832.7 liters (220 US gal.; 183.2 Imp. gal) fuel tank.

John Deere 8560 Specifications

General Specifications
Model John Deere 8560
Length 6,830 mm (268.9 in)
Width –
Height –
Wheel base 3,400 mm (133.9 in)
Weight (operating) 14,549 kg (32,075 lbs)
Fuel tank capacity 832.7 liters (220 US gal.; 183.2 Imp. gal)
Battery Two 12V, CCA 925A
Cabin type Sound-Gard Cab
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.6 L, 7,636 cm2, (466.0 cu·in)
Bore and stroke 116.0 mm X 121.0 mm (4.57 in X 4.76 in)
Compression ratio 16.0:1
Horsepower 238.3 PS (175.2 kW; 235.0 HP) at 2,100 rpm
Starter Electric
Coolant capacity: 54.9 L (58 US. qt, 48.3 Imp. qt.)
Transmission and chassis
Chassis 4×4 articulated 4WD
Steering type Articulated power
Brakes Hydraulic wet disc
Transmission model John Deere Syncro
Transmission type Partially synchronized with hydraulic wet disc clutch
Gears 12 forward and 3 reverse
Transmission model John Deere PowrSync
Transmission type Partial power shift with hydraulic wet disc clutch
Gears 24 forward and 6 reverse
Tires
Front tires Ag: 18.4-38
Rear tires Ag: 18.4-38
Three-Point Hitch
Category III
Control type –
Lift capacity 6,796 kg (14,985 lbs)
PTO (Power take-off shaft)
Rear PTO type –
Rear PTO speed 1000 rpm
Hydraulic system
Hydraulic type Closed-center pressure compensated
Hydraulic capacity 140.0 L (37 US. gal, 30.8 Imp. gal.)
Pump flow 44.8 gpm (169.6 lpm)
SCV flow 33.3 gpm (126.1 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*