The Mahindra 4025 is a 2WD or 4WD utility tractor from the 25 series. This tractor was manufactured by the Mahindra in Maharashtra, India from 2008 to 2018. The Mahindra 4025 is equipped with a 2.7 L four-cylinder diesel engine and sliding mesh transmission with 8 forward and 2 reverse gears.
The Mahindra 4025 utility tractor used the Mahindra MDI 2700R2 engine. It is a 3.7 L, 2,732 cm2, (166.7 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 19.5:1. This engine produced 41.6 PS (30.6 kW; 41.0 HP) at 2,300 rpm of maximum horsepower. The Mahindra 4025 is equipped with hydrostatic power steering, dry disc brakes, open operator station with two-post ROPS and 55.0 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.
Following attachments are available for Mahindra 4025 utility tractor:
- Mahindra ML232 loader (for 2WD version)
- Mahindra ML234 loader (for 4WD version)
- Mahindra ANBH86 backhoe (only for 4WD version)
Mahindra 4025 Specifications
| General Specifications | |
| Model | Mahindra 4025 |
| Length | 2WD: 2,920 mm (115 in) 4WD: 3,270 mm (129 in) |
| Width | 2WD: 1,760 mm (69.3 in) 4WD: 2,280 mm (90 in) |
| Height | – |
| Wheel base | – |
| Weight | 2WD: 1,990 kg (4,387 lbs) 4WD: 2,245 kg (4,950 lbs) |
| Fuel tank capacity | 55.0 liters (14.5 US gal.; 12.1 Imp. gal) |
| Battery | 12V, 96Ah |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | Mahindra MDI 2700R2 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.7 L, 2,732 cm2, (166.7 cu·in) |
| Bore and stroke | 89.0 mm X 110.0 mm (3.5 in X 4.33 in) |
| Compression ratio | 19.5:1 |
| Horsepower | 41.6 PS (30.6 kW; 41.0 HP) at 2,300 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Dry disc |
| Transmission model | – |
| Transmission type | Sliding mesh |
| Gears | 8 forward and 2 reverse |
| Tires | |
| Front tires | Ag: 6×16 (2WD), 9.5×16 (4WD) Industrial: 12.x16.5 (4WD) |
| Rear tires | Ag: 12.4×28 Industrial: 16.9×24 (4WD) |
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | Position and draft control |
| Lift capacity | 1,600 kg (3,528 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Live with 2-stage clutch |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 0 or 1 |
| Total flow | 8.3 gpm (31.4 lpm) |
| Steering flow | 4.8 gpm (18.2 lpm) |
Be the first to comment