The John Deere 8530 is a 4WD row-crop tractor from the 8030 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2006 to 2009. The John Deere 8530 is equipped with a 9.0 L (549.0 cu·in) six-cylinder diesel engine and an infinitely variable transmission (IVT) with infinite forward and reverse gears.
The John Deere 8530 row-crop tractor used the John Deere 6090HF485 engine. It is a 9.0 L, 8,996 cm2, (549.0 cu·in) six-cylinder variable geometry turbocharged diesel engine with 118.4 mm (4.66 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. The compression ratio rating is 16.3:1. This engine produced 365.2 PS (268.5 kW; 360.0 HP) at 2,200 rpm of maximum output power.
The JD 8530 is equipped with power steering, hydraulic wet disc brakes, CommandView cab, and 681.0 liters (179.9 US gal.; 149.8 Imp. gal) fuel tank.
John Deere 8530 Specifications
| General Specifications | |
| Model | John Deere 8530 |
| Length | 5,560 mm (218.9 in) |
| Width | mm (0 in) |
| Height | 3,120 mm (122.8 in) |
| Wheel base | 3,020 mm (118.9 in) |
| Weight | 12,160 kg (26,808 lbs) |
| Fuel tank capacity | 681.0 liters (179.9 US gal.; 149.8 Imp. gal) |
| Battery | Two 12C, CCA 925A |
| Cabin type | CommandView cab |
| Engine | |
| Engine model | John Deere 6090HF485 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 9.0 L, 8,996 cm2, (549.0 cu·in) |
| Bore and stroke | 118.4 mm X 136.0 mm (4.66 in X 5.35 in) |
| Compression ratio | 16.3:1 |
| Horsepower | 365.2 PS (268.5 kW; 360.1 HP) at 2,200 rpm |
| Starter | Electric |
| Oil capacity: | 27.9 L (29.5 US. qt, 24.5 Imp. qt.) |
| Coolant capacity: | 40.0 L (42.3 US. qt, 35.2 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 Independent Link Suspension (ILS) MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Transmission model | John Deere |
| Transmission type | Infinitely Variable Transmission (IVT) |
| Gears | Infinite forward and reverse |
| Tires | |
| Front tires | Ag: 600/65R30 |
| Rear tires | Ag: 710/70R42 |
| Three-Point Hitch | |
| Caterogy | IVN/III |
| Control type | – |
| Lift capacity (at 610 mm /24 in) | 8,310 kg (18,325 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1,000 or 540/1,000 (optional) rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure-flow compensating PFC |
| Pressure | 2990 psi (206.2 bar) |
| Valves | 3 to 5 |
| Pump flow | 31.7 gpm (120 lpm) |
| Steering flow | 60.0 gpm (227.1 lpm) |
Be the first to comment