John Deere 8530

John Deere 8530The John Deere 8530 is a 4WD row-crop tractor from the 8030 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 2006 to 2009. The John Deere 8530 is equipped with a 9.0 L (549.0 cu·in) six-cylinder diesel engine and an infinitely variable transmission (IVT) with infinite forward and reverse gears.

The John Deere 8530 row-crop tractor used the John Deere 6090HF485 engine. It is a 9.0 L, 8,996 cm2, (549.0 cu·in) six-cylinder variable geometry turbocharged diesel engine with 118.4 mm (4.66 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. The compression ratio rating is 16.3:1. This engine produced 365.2 PS (268.5 kW; 360.0 HP) at 2,200 rpm of maximum output power.

The JD 8530 is equipped with power steering, hydraulic wet disc brakes, CommandView cab, and 681.0 liters (179.9 US gal.; 149.8 Imp. gal) fuel tank.

John Deere 8530 Specifications

General Specifications
ModelJohn Deere 8530
Length5,560 mm (218.9 in)
Width mm (0 in)
Height3,120 mm (122.8 in)
Wheel base3,020 mm (118.9 in)
Weight12,160 kg (26,808 lbs)
Fuel tank capacity681.0 liters (179.9 US gal.; 149.8 Imp. gal)
BatteryTwo 12C, CCA 925A
Cabin typeCommandView cab
Engine modelJohn Deere 6090HF485
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement9.0 L, 8,996 cm2, (549.0 cu·in)
Bore and stroke118.4 mm X 136.0 mm (4.66 in X 5.35 in)
Compression ratio16.3:1
Horsepower365.2 PS (268.5 kW; 360.1 HP) at 2,200 rpm
Oil capacity:27.9 L (29.5 US. qt, 24.5 Imp. qt.)
Coolant capacity:40.0 L (42.3 US. qt, 35.2 Imp. qt.)
Transmission and chassis
Chassis4×4 Independent Link Suspension (ILS) MFWD 4WD
Steering typePower
BrakesHydraulic wet disc
Transmission modelJohn Deere
Transmission typeInfinitely Variable Transmission (IVT)
GearsInfinite forward and reverse
Front tiresAg: 600/65R30
Rear tiresAg: 710/70R42
Three-Point Hitch
Control type
Lift capacity (at 610 mm /24 in)8,310 kg (18,325 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed1,000 or 540/1,000 (optional) rpm
Hydraulic system
Hydraulic typeClosed center pressure-flow compensating PFC
Pressure2990 psi (206.2 bar)
Valves3 to 5
Pump flow31.7 gpm (120 lpm)
Steering flow60.0 gpm (227.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.