John Deere 5603

John Deere 5603The John Deere 5603 is a 4WD utility tractor manufactured by John Deere in Augusta, Georgia, USA from 2007 to 2008. The John Deere 5603 is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and a power shuttle transmission with 12 forward and 12 reverse gears and wet disc clutch.

The JD 5603 utility tractor used the John Deere PowerTech 4045 engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5.0 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 100.4 PS (73.8 kW; 99.0 HP) at 2,400 rpm of output power.

The John Deere 5603 is equipped with hydrostatic power steering, wet disc brakes, cab (standard), and 126.8 liters (33.5 US gal.; 27.9 Imp. gal) fuel tank.

John Deere 5603 Specifications

General Specifications
Model John Deere 5603
Length –
Width –
Height –
Wheel base 2,170 mm (85.4 in)
Ground clearance 400 mm (15.7 in)
Weight (operating) 3,240 kg (7,143 lbs)
Fuel tank capacity 126.8 liters (33.5 US gal.; 27.9 Imp. gal)
Battery 12V, CCA 750A, Group 31
Cabin type Cab (standard)
Engine
Engine model John Deere PowerTech 4045
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.5 L, 4,523 cm2, (276.0 cu·in)
Bore and stroke 106.0 mm X 127.0 mm (4.17 in X 5.0 in)
Compression ratio 17.0:1
Horsepower 100.4 PS (73.8 kW; 99.0 HP) at 2,400 rpm
Starter Electric
Oil capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: 11.4 L (12 US. qt, 10 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc
Transmission model PowrReverser
Transmission type Power shuttle with wet disc clutch
Gears 12 forward and 12 reverse
Speed Forward: 37.4 kmh (23.2 mph) Reverse: 40.8 (25.4 mph)
Transmission oil capacity 43.5 L (11.5 US. gal, 9.6 Imp. gal.)
Tires
Front tires Ag: 12.4-24
Rear tires Ag: 18.4-30
Three-Point Hitch
Category II/I
Control type –
Lift capacity (at 610 mm/24 in) 1,530 kg (3,375 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/540E, 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 43.5 L (11.5 US. gal, 9.6 Imp. gal.)
Valves 1 to 3
Pump flow 15.9 gpm (60.2 lpm)
Total flow 22.5 gpm (85.2 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*