The John Deere 4055 is a 2WD or 4WD row-crop tractor from the 4055 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1988 to 1992. The John Deere 4055 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 6 reverse gears and hydraulic wet disc clutch or a full powershift transmission with 15 forward and 4 reverse gears and hydraulic wet disc clutch .
The JD 4055 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,637 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 118.6 PS (87.2 kW; 117.0 HP) at 2,200 rpm of output power.
The John Deere 4055 is equipped with power steering, differential hydraulic wet disc brakes, Sound-Gard cab, and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.
Following attachments are available for the JD 4055 row-crop tractor:
- John Deere 265 loader
- John Deere 280 loader (for 4WD version)
- John Deere 840 loader
John Deere 4055 Specifications
| General Specifications | |
| Model | John Deere 4055 |
| Length | 4,020 mm (158.3 in) |
| Width | 2,430 mm (95.7 in) |
| Height | Cab: 2,950 mm (116.1 in) |
| Wheel base | 2WD: 2,710 mm (106.7 in) 4WD: 2,670 mm (105.1 in) |
| Weight (shipping) | 2WD Quad-range: 5,500 kg (12,125 lbs) 4WD Powershift: 6,330 kg (13,955 lbs) |
| Fuel tank capacity | 246.0 liters (65 US gal.; 54.1 Imp. gal) |
| Battery | Two 12V, CCA 925A |
| Cabin type | Sound-Gard cab |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 7.6 L, 7,637 cm2, (466.0 cu·in) |
| Bore and stroke | 116.0 mm X 121.0 mm (4.57 in X 4.76 in) |
| Compression ratio | 16.0:1 |
| Horsepower | 118.6 PS (87.2 kW; 117.0 HP) at 2,200 rpm |
| Starter | Electric |
| Oil capacity: | 18.0 L (19 US. qt, 15.8 Imp. qt.) |
| Coolant capacity: | 25.6 L (27.1 US. qt, 22.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Differential hydraulic wet disc |
| Final drive | Inboard planetary |
| Transmission model | John Deere Quad Range |
| Transmission type | Partial power shift with hydraulic wet disc clutch |
| Gears | 16 forward and 6 reverse |
| Speed | Forward: 29.4 kmh (18.3 mph) Reverse: 18.6 (11.6 mph) |
| Transmission oil capacity | 2WD: 60.6 L (16.0 US. gal, 13.3 Imp. gal.) 4WD: 65.1 L (17.2 US. gal, 14.3 Imp. gal.) |
| Transmission model | John Deere Power Shift |
| Transmission type | Full power shift with hydraulic wet disc clutch |
| Gears | 15 forward and 4 reverse |
| Speed | Forward: 30.0 kmh (18.6 mph) Reverse: 9.0 (5.6 mph) |
| Transmission oil capacity | 2WD: 51.0 L (13.5 US. gal, 11.2 Imp. gal.) 4WD: 60.0 L (15.9 US. gal, 13.2 Imp. gal.) |
| Tires | |
| Front tires | Ag: 10.00-16 (2WD), 14.9-26 (4WD) |
| Rear tires | Ag: 18.4-38 |
| Three-Point Hitch | |
| Category | II |
| Control type | – |
| Lift capacity (at ends) | 2,495 kg (5,500 lbs) 3,300 kg (7,280 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with hydraulic clutch |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Pressure | 2530 psi (174.4 bar) |
| Valves | 2 or 3 |
| Pump flow | 26.5 gpm (100.3 lpm) |
| SCV flow | 20.6 gpm (78 lpm) |
Be the first to comment