John Deere 4055

John Deere 4055The John Deere 4055 is a 2WD or 4WD row-crop tractor from the 4055 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1988 to 1992. The John Deere 4055 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 6 reverse gears and hydraulic wet disc clutch or a full powershift transmission with 15 forward and 4 reverse gears and hydraulic wet disc clutch .

The JD 4055 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,637 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 118.6 PS (87.2 kW; 117.0 HP) at 2,200 rpm of output power.

The John Deere 4055 is equipped with power steering, differential hydraulic wet disc brakes, Sound-Gard cab, and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.

Following attachments are available for the JD 4055 row-crop tractor:

  • John Deere 265 loader
  • John Deere 280 loader (for 4WD version)
  • John Deere 840 loader

John Deere 4055 Specifications

General Specifications
Model John Deere 4055
Length 4,020 mm (158.3 in)
Width 2,430 mm (95.7 in)
Height Cab: 2,950 mm (116.1 in)
Wheel base 2WD: 2,710 mm (106.7 in)
4WD: 2,670 mm (105.1 in)
Weight (shipping) 2WD Quad-range: 5,500 kg (12,125 lbs)
4WD Powershift: 6,330 kg (13,955 lbs)
Fuel tank capacity 246.0 liters (65 US gal.; 54.1 Imp. gal)
Battery Two 12V, CCA 925A
Cabin type Sound-Gard cab
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.6 L, 7,637 cm2, (466.0 cu·in)
Bore and stroke 116.0 mm X 121.0 mm (4.57 in X 4.76 in)
Compression ratio 16.0:1
Horsepower 118.6 PS (87.2 kW; 117.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 18.0 L (19 US. qt, 15.8 Imp. qt.)
Coolant capacity: 25.6 L (27.1 US. qt, 22.5 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Final drive Inboard planetary
Transmission model John Deere Quad Range
Transmission type Partial power shift with hydraulic wet disc clutch
Gears 16 forward and 6 reverse
Speed Forward: 29.4 kmh (18.3 mph) Reverse: 18.6 (11.6 mph)
Transmission oil capacity 2WD: 60.6 L (16.0 US. gal, 13.3 Imp. gal.)
4WD: 65.1 L (17.2 US. gal, 14.3 Imp. gal.)
Transmission model John Deere Power Shift
Transmission type Full power shift with hydraulic wet disc clutch
Gears 15 forward and 4 reverse
Speed Forward: 30.0 kmh (18.6 mph) Reverse: 9.0 (5.6 mph)
Transmission oil capacity 2WD: 51.0 L (13.5 US. gal, 11.2 Imp. gal.)
4WD: 60.0 L (15.9 US. gal, 13.2 Imp. gal.)
Tires
Front tires Ag: 10.00-16 (2WD), 14.9-26 (4WD)
Rear tires Ag: 18.4-38
Three-Point Hitch
Category II
Control type
Lift capacity (at ends) 2,495 kg (5,500 lbs)
3,300 kg (7,280 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic clutch
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2530 psi (174.4 bar)
Valves 2 or 3
Pump flow 26.5 gpm (100.3 lpm)
SCV flow 20.6 gpm (78 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*