CaseIH 2096

CaseIH 2096The CaseIH 2096 is a 2WD or 4WD row-crop tractor from the 96 series. This tractor was manufactured by CaseIH in Racine, Wisconsin, USA from 1985 to 1989. The Case IH 2096 is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and a three-speed power shift transmission with 12 forward and 3 reverse gears.

The Case IH 2096 row-crop tractor used the CDC engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder turbocharged diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 117.6 PS (86.5 kW; 116.0 HP) at 2,100 rpm of PTO output power.

The CaseIH 2096 is equipped with power steering, differential hydraulic wet discs brakes, Two-post folding ROPS or cab (optional), and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.

CaseIH 2096 Specifications

General Specifications
Model CaseIH 2096
Length 4,340 mm (170.9 in)
Width
Height
Wheel base 2,740 mm (107.9 in)
Ground clearance 400 mm (15.7 in)
Weight (shipping) 2WD: 5,390 kg (11,883 lbs)
4WD: 5,930 kg (13,073 lbs)
Fuel tank capacity 246.0 liters (65 US gal.; 54.1 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS or Cab (optional)
Engine
Engine model CDC
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,883 cm2, (359.0 cu·in)
Bore and stroke 102.0 mm X 120.0 mm (4.02 in X 4.72 in)
Compression ratio 16.5:1
Horsepower 117.6 PS (86.5 kW; 116.0 HP) at 2,100 rpm
Starter Electric
Oil capacity: 15.1 L (16 US. qt, 13.3 Imp. qt.)
Coolant capacity: 20.8 L (22 US. qt, 18.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet discs
Differential lock Electric rear
Transmission model
Transmission type Three-speed power shift
Gears 12 forward and 3 reverse
Speed Forward: 29.1 kmh (18.1 mph) Reverse: 13.0 (8.1 mph)
Transmission oil capacity 94.6 L (25 US. gal, 20.8 Imp. gal.)
Tires
Front tires Ag: 11.00-16 (2WD), 16.9-26 (4WD)
Rear tires Ag: 18.4-38
Three-Point Hitch
Category II
Control type
Lift capacity (at 610 mm /24 in) 3,742 kg (8,250 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 94.6 L (25 US. gal, 20.8 Imp. gal.)
Pressure 2250 psi (155.1 bar)
Valves 2
Pump flow 23.0 gpm (87.1 lpm)
Steering flow 8.0 gpm (30.3 lpm)
Total flow 31.0 gpm (117.3 lpm)