CaseIH 1130

CaseIH 1130The CaseIH 1130 is a 2WD or 4WD compact utility tractor from the 1100 series. This tractor was manufactured by Mitsubishi for distributor CaseIH during 1991. The CaseIH 1130 is equipped with a 1.2 L (75.4 cu·in) three-cylinder diesel engine and one of two transmissions: a gear type transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The CaseIH 1130 compact utility tractor used the Mitsubishi engine. It is a 1.2 L, 1,235 cm2, (75.4 cu·in) three-cylinder natural aspirated diesel engine with 82.0 mm (3.23 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. This engine produced 23.4 PS (17.2 kW; 23.0 HP) at 2,500 rpm of output power.

The CaseIH 1130 is equipped with power steering, wet disc brakes, two-post folding ROPS, and 29.9 liters (7.9 US gal.; 6.6 Imp. gal) fuel tank.

Following attachments are available for the CaseIH 1130 compact utility tractor:

  • Mid-mount Case IH M160 1,520 mm (60 in) mower deck with 3-blade
  • Mid-mount Case IH M172 1,820 mm (72 in) mower deck with 3-blade
  • Front-mount Case IH 72F 1,820 mm (72 in) mower deck with 3-blade
  • Front-mount Case IH IH 54 MS two-stage snowblower
  • Front-mount Case IH L108 loader
  • Case IH H180 backhoe

CaseIH 1130 Specifications

General Specifications
Model CaseIH 1130
Length 2,920 mm (115 in)
Width 1,290 mm (50.8 in)
Height (ROPS) 2,120 mm (83.5 in)
Wheel base 1,650 mm (65 in)
Weight 910 kg (2,006 lbs)
Fuel tank capacity 29.9 liters (7.9 US gal.; 6.6 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS
Engine
Engine model Mitsubishi
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.2 L, 1,235 cm2, (75.4 cu·in)
Bore and stroke 82.0 mm X 78.0 mm (3.23 in X 3.07 in)
Horsepower 23.4 PS (17.2 kW; 23.0 HP) at 2,500 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Gear type
Gears 9 forward and 3 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Tires
Front tires Ag: 5.00-15 (2WD), 7-14 (4WD)
Rear tires Ag: 9.5-24
Three-Point Hitch
Category I
Control type
Lift capacity (at ends) 1,000 kg (2,200 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO speed 2,000 rpm
Rear PTO type Live
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pressure 2133 psi (147.1 bar)
Valves 1
Pump flow 7.2 gpm (27.3 lpm)
Steering flow 3.2 gpm (12.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*