CaseIH 7150

CaseIH 7150The CaseIH 7150 is a 4WD row-crop tractor from the Magnum series. This tractor was manufactured by CaseIH in Racine, Wisconsin, USA from 1990 to 1993. The CaseIH 7150 is equipped with an 8.3 L (504.5 cu·in) six-cylinder diesel engine and a full powershift transmission with 18 forward and 4 reverse gears and wet disc clutch.

The CaseIH 7150 row-crop tractor used the CDC engine. It is a 8.3 L, 8,267 cm2, (504.5 cu·in) six-cylinder turbocharged intercooled diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 135.0 mm (5.31 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 218 PS (160.3 kW; 215.0 HP) at 2,200 rpm of output power.
The Case IH 7150 Magnum is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, Silent Guardian II Cab with air-conditioning (standard), and 359.6 liters (95 US gal.; 79.1 Imp. gal) fuel tank.

CaseIH 7150 Specifications

General Specifications
ModelCaseIH 7150 Magnum
Length–
Width–
Height–
Wheel base–
Weight (operating)8,430 kg (18,585 lbs)
Fuel tank capacity359.6 liters (95 US gal.; 79.1 Imp. gal)
BatteryTwo 12V, CCA 950A
Cabin typeSilent Guardian II Cab with air-conditioning (standard)
Engine
Engine modelCDC
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement8.3 L, 8,267 cm2, (504.5 cu·in)
Bore and stroke114.0 mm X 135.0 mm (4.49 in X 5.31 in)
Compression ratio16.5:1
Horsepower218 PS (160.3 kW; 215.0 HP) at 2,200 rpm
StarterElectric
Oil capacity:19.9 L (21 US. qt, 17.5 Imp. qt.)
Coolant capacity:28.4 L (30 US. qt, 25 Imp. qt.)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesDifferential hydraulic wet disc
Transmission modelCaseIH
Transmission typeFull power shift with wet disc clutch
Gears18 forward and 4 reverse
Speed Forward: 32.8 kmh (20.4 mph) Reverse: 11.9 (7.4 mph)
Tires
Front tires Ag: 16.9-26
Rear tires Ag: 20.8-38
Three-Point Hitch
CategoryIII
Control typeElectronic lower link
Lift capacity (at 610 mm/ 24 in)5,769 kg (12,720 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent with wet disc clutch
Rear PTO speed1000 rpm
Hydraulic system
Hydraulic typeClosed center pressure flow compensated (PFC)
Hydraulic capacity191.1 L (50.5 US. gal, 42 Imp. gal.)
Pressure2600 psi (179.3 bar)
Valves2 to 4
Pump flow22.0 gpm (83.3 lpm)
Total flow29.0 gpm (109.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*