CaseIH 8920

CaseIH 8920The CaseIH Magnum 8920 is a 2WD or 4WD row-crop tractor from the Magnum 8900 series. This tractor was manufactured by CaseIH in Racine, Wisconsin, USA from 1997 to 1998. The CaseIH 8920 is equipped with a 8.3 L (504.5 cu·in) six-cylinder diesel engine and a full power transmission with 18 forward and 4 reverse gears.

The CaseIH 8920 row-crop tractor used the CDC engine. It is a 8.3 L, 8,267 cm2, (504.5 cu·in) six-cylinder turbocharged diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 135.0 mm (5.31 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 157.2 PS (115.6 kW; 155.0 HP) at 2,200 rpm of PTO output power.

The Magnum 8920 is equipped with power steering, differential hydraulic wet disc brakes, Cab (standard) and 329.3 liters (87 US gal.; 72.4 Imp. gal) fuel tank.

CaseIH 8920 Specifications

General Specifications
ModelCaseIH 8920 Magnum
Length
Width
Height
Wheel base3,000 mm (118.1 in)
Ground clearance (front axle) 2WD: 560 mm (22 in)
4WD: 420 mm (16.5 in)
Weight (shipping) 2WD: 7,090 kg (15,631 lbs)
4WD: 7,520 kg (16,579 lbs)
Fuel tank capacity329.3 liters (87 US gal.; 72.4 Imp. gal)
BatteryTwo 12V, CCA 950A
Cabin typeCab (standard)
Engine
Engine modelCDC
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement8.3 L, 8,267 cm2, (504.5 cu·in)
Bore and stroke114.0 mm X 135.0 mm (4.49 in X 5.31 in)
Compression ratio16.5:1
Horsepower157.2 PS (115.6 kW; 155 HP) at 2,200 rpm
StarterElectric
Oil capacity:20.8 L (22 US. qt, 18.3 Imp. qt.)
Coolant capacity:26.5 L (28 US. qt, 23.3 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesDifferential hydraulic wet disc
Differential lockElectric rear
Transmission model
Transmission typeFull power shift with hydraulic wet disc clutch
Gears18 forward and 4 reverse
Speed Forward: 30.8 kmh (19.1 mph) Reverse: 11.2 kmh (7 mph)
Tires
Front tires Ag: 14L-16.1
Rear tires Ag: 20.8R-42
Three-Point Hitch
CategoryIII/IIIN
Control typeElectronic lower-link draft sensing
Lift capacity4,536 kg (10,000 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent with electro-hydraulic wet disc clutch
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeClosed center pressure-flow compensated (PFC)
Hydraulic capacity172.2 L (45.5 US. gal, 37.9 Imp. gal.)
Pressure2200 psi (151.7 bar)
Valves2 to 4
Pump flow29.0 gpm (109.8 lpm)
SCV flow27.0 gpm (102.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*