CaseIH 9330

CaseIH 9330The CaseIH 9330 is a four-wheel drive tractor from the 9300 series. This tractor was manufactured by CaseIH in Fargo, North Dakota, USA from 1996 to 1999. The CaseIH 9330 is equipped with a 8.3 L (505.0 cu·in) six-cylinder diesel engine and a full powershift transmission with 12 forward and 3 reverse gears.

The CaseIH 9330 four-wheel drive used the CDC 6TA engine. It is a 8.3 L, 8,275 cm2, (505.0 cu·in) six-cylinder turbocharged diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 135.0 mm (5.31 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 243.4 PS (179.0 kW; 240.0 HP) at 2,200 rpm of output power.

The CaseIH 9330 is equipped with articulated power steering, hydraulic disc brakes, cab (standard) with air-conditioning, and 435.3 liters (115 US gal.; 95.8 Imp. gal) fuel tank.

CaseIH 9330 Specifications

General Specifications
Model CaseIH 9330
Length 6,140 mm (241.7 in)
Width 2,250 mm (88.6 in)
Height (exhaust) 3,310 mm (130.3 in)
Wheel base Row-crop: 3,040 mm (119.7 in)
Ground clearance (front axle) 820 mm (32.3 in)
Fixed: 3,050 mm (120.1 in)
Weight (operating) 10,730 kg (23,656 lbs)
Fuel tank capacity 435.3 liters (115 US gal.; 95.8 Imp. gal)
Battery Two 12V, CCA 625A
Cabin type Cab (standard) with air-conditioning
Engine model CDC 6TA
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,275 cm2, (505.0 cu·in)
Bore and stroke 114.0 mm X 135.0 mm (4.49 in X 5.31 in)
Compression ratio 16.5:1
Horsepower 243.4 PS (179.0 kW; 240.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 21.0 L (22.2 US. qt, 18.5 Imp. qt.)
Coolant capacity: 27.9 L (29.5 US. qt, 24.5 Imp. qt.)
Transmission and chassis
Chassis 4×4 articulated 4WD
Steering type Articulated power
Brakes Hydraulic disc
Transmission model
Transmission type Full powershift with hydraulic wet disc
Gears 12 forward and 3 reverse
Speed Forward: 30.0 kmh (18.6 mph) Reverse: 14.6 kmh (9.1 mph)
Front tires Ag: 18.4R-38
Rear tires Ag: 18.4R-38
Three-Point Hitch
Category III
Control type
Lift capacity (at 610 mm/24 in) 5,785 kg (12,755 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2900 psi (200 bar)
Valves 4
Pump flow 28.0 gpm (106 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.