The CaseIH Farmall DX25E is a 4WD sub-compact utility tractor from the DXE series. This tractor was manufactured by CaseIH from 2005 to 2007. The Case-IH DX25E is equipped with a 1.0 L (61.3 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.
The Case IH DX25E sub-compact utility tractor used the Shibaura S773 engine. It is a 1.0 L, 1,004 cm2, (61.3 cu·in) three-cylinder natural aspirated diesel engine with 77.0 mm (3.03 in) of the cylinder bore and 72.0 mm (2.83 in) of the piston stroke. This engine produced 25.3 PS (18.6 kW; 25.0 HP) at 3,000 rpm of output power.
The CaseIH Farmall DX25E is equipped with power steering, wet disc brakes, Two-post ROPS, and 30.0 liters (7.9 US gal.; 6.6 Imp. gal) fuel tank.
CaseIH Farmall DX25E Specifications
| General Specifications | |
| Model | CaseIH Farmall DX25E |
| Length | 2,440 mm (96.1 in) |
| Width | 1,160 mm (45.7 in) |
| Height (ROPS) | 2,280 mm (89.8 in) |
| Wheel base | 1,390 mm (54.7 in) |
| Weight | 598 kg (1,318 lbs) |
| Fuel tank capacity | 30.0 liters (7.9 US gal.; 6.6 Imp. gal) |
| Battery | 12V, CCA 325A |
| Cabin type | Two-post ROPS |
| Engine | |
| Engine model | Shibaura S773 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.0 L, 1,004 cm2, (61.3 cu·in) |
| Bore and stroke | 77.0 mm X 72.0 mm (3.03 in X 2.83 in) |
| Horsepower | 25.3 PS (18.6 kW; 25.0 HP) at 3,000 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Tires | |
| Front tires | Industrial: 18×8.50-8 |
| Rear tires | Industrial: 26×12.00-12 |
| Three-Point Hitch | |
| Category | I |
| Control type | – |
| Lift capacity (at ends) | 317 kg (699 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pump flow | 5.5 gpm (20.8 lpm) |
Be the first to comment