Cub Cadet 6284

Cub Cadet 6284The Cub Cadet 6284 is a 4WD compact utility tractor from the 6000 series. This tractor was manufactured by Cub Cadet from 2005 to 2015. The Cub Cadet 6284 is equipped with a 1.1 L (69.0 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet 6284 compact utility tractor used the Caterpillar engine. It is a 1.1 L, 1,131 cm2, (69.0 cu·in) three-cylinder natural aspirated diesel engine with 77.0 mm (3.03 in) of the cylinder bore and 81.0 mm (3.19 in) of the piston stroke. The compression ratio rating is 23.0:1. This engine produced 28.4 PS (20.9 kW; 28.0 HP) at 3,400 rpm of output power.

The Cub Cadet 6284 is equipped with hydrostatic power steering, dry shoe/drum brakes, two-post foldable ROPS and 22.7 liters (6 US gal.; 5 Imp. gal) fuel tank.

Cub Cadet 6284 Specifications

General Specifications
Model Cub Cadet 6284
Length 3,210 mm (126.4 in)
Width 1,270 mm (50 in)
Height 2,080 mm (81.9 in)
Wheel base 1,470 mm (57.9 in)
Ground clearance 250 mm (9.8 in)
Weight 890 kg (1,962 lbs)
Fuel tank capacity 22.7 liters (6 US gal.; 5 Imp. gal)
Battery 12V, CCA 500A
Cabin type Two-post foldable ROPS
Engine model Caterpillar
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.1 L, 1,131 cm2, (69.0 cu·in)
Bore and stroke 77.0 mm X 81.0 mm (3.03 in X 3.19 in)
Compression ratio 23.0:1
Horsepower 28.4 PS (20.9 kW; 28.0 HP) at 3,400 rpm
Starter Electric
Oil capacity: 4.9 L (5.2 US. qt, 4.3 Imp. qt.)
Coolant capacity: 5.2 L (5.5 US. qt, 4.6 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Dry Shoe / Drum
Transmission model
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 17.7 kmh (11 mph) Reverse: 10.3 (6.4 mph)
Transmission oil capacity 24.6 L (6.5 US. gal, 5.4 Imp. gal.)
Front tires Lawn/turf: 23×9.5-12
Rear tires Lawn/turf: 31×12-15
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends) 520 kg (1,150 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO speed 2,000 rpm
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Gear pump
Hydraulic capacity 24.6 L (25.99 US. qt, 21.64 Imp. qt.)
Pressure 1500 psi (103.4 bar)
Valves 1
Pump flow 5.0 gpm (18.9 lpm)
Steering flow 3.0 gpm (11.4 lpm)
Total flow 8.0 gpm (30.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.