Cub Cadet EX3200

Cub Cadet EX3200The Cub Cadet EX3200 is a 4WD compact utility tractor from the EX series. This tractor was manufactured by Yanmar for Cub Cadet from 2007 to 2011. The Cub Cadet EX3200 is equipped with a 1.6 L (100.2 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The Cub Cadet EX3200 compact utility tractor used the Yanmar 3TNV88 engine. It is a 1.6 L, 1,642 cm2, (100.2 cu·in) three-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 32.0 PS (23.5 kW; 31.5 HP) at 2,600 rpm of gross output power.

The Cub Cadet EX3200 is equipped with power steering, wet disc brakes, two-post foldable ROPS and 24.0 liters (6.3 US gal.; 5.3 Imp. gal) fuel tank.

Following attachments are available for the Cub Cadet EX3200 compact utility tractor:

  • Cub Cadet CL300 loader
  • Cub Cadet CB75 backhoe

Cub Cadet EX3200 Specifications

General Specifications
Model Cub Cadet Yanmar EX3200
Length 2,780 mm (109.4 in)
Width 1,500 mm (59.1 in)
Height 2,230 mm (87.8 in)
Wheel base 1,550 mm (61 in)
Ground clearance 255 mm (10 in)
Weight 1,135 kg (2,502 lbs)
Fuel tank capacity 24.0 liters (6.3 US gal.; 5.3 Imp. gal)
Battery 12V, CCA 540A
Cabin type Two-post foldable ROPS
Engine model Yanmar 3TNV88
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.6 L, 1,642 cm2, (100.2 cu·in)
Bore and stroke 88.0 mm X 90.0 mm (3.46 in X 3.54 in)
Horsepower 32.0 PS (23.5 kW; 31.5 HP) at 2,600 rpm
Starter Electric
Oil capacity: 4.0 L (4.2 US. qt, 3.5 Imp. qt.)
Coolant capacity: 4.5 L (4.8 US. qt, 4 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Speed Forward: 21.3 kmh (13.2 mph) Reverse: 21.3 (13.2 mph)
Transmission oil capacity 20.3 L (5.4 US. gal, 4.5 Imp. gal.)
Front tires Ag: 7-14
Lawn/turf: 25×8.50-14
Industrial: 25×8.50-14
Rear tires Ag: 11.2-24
Lawn/turf: 13.6-16
Industrial: 15-19.5
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at ends) 568 kg (1,252 lbs)
PTO (Power take-off shaft)
Middle PTO type Continuous Live
Middle PTO speed 2,100 rpm
Rear PTO type Continuous Live with Overrunning Clutch
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pressure 2030 psi (140 bar)
Pump flow 5.6 gpm (21.2 lpm)
Steering flow 4.3 gpm (16.3 lpm)
Total flow 9.9 gpm (37.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.