The Cub Cadet Sc2400 is a 4WD sub-compact utility tractor from the SC series. This tractor was manufactured by Cub Cadet Yanmar from 2008 to 2011. The Cub Cadet Sc2400 is equipped with a 0.9 L (55.1 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.
The Cub Cadet Sc2400 sub-compact utility tractor used the Yanmar engine. It is a 0.9 L, 903 cm2, (55.1 cu·in) three-cylinder natural aspirated diesel engine with 72.0 mm (2.83 in) of the cylinder bore and 74.0 mm (2.91 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 2,400 rpm of output power.
The Cub Cadet Sc2400 is equipped with power steering, wet disc brakes, ROPS (standard) or steel cab (optional) and 22.0 liters (5.8 US gal.; 4.8 Imp. gal) fuel tank.
Available variants:
- Sc2400 TD: includes 60-inch mid-mount mower
- Sc2400 TL: includes loader
- Sc3400 TLD: includes mower and loader
- Sc2450: tractor backhoe
Cub Cadet Sc2400 Specifications
| General Specifications | |
| Model | Cub Cadet Sc2400 |
| Length | 2,420 mm (95.3 in) |
| Width | 1,130 mm (44.5 in) |
| Height | – |
| Wheel base | 1,390 mm (54.7 in) |
| Ground clearance | 190 mm (7.5 in) |
| Weight | 580 kg (1,280 lbs) |
| Fuel tank capacity | 22.0 liters (5.8 US gal.; 4.8 Imp. gal) |
| Battery | 12V |
| Cabin type | ROPS (standard) or steel cab (optional) |
| Engine | |
| Engine model | Yanmar |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 0.9 L, 903 cm2, (55.1 cu·in) |
| Bore and stroke | 72.0 mm X 74.0 mm (2.83 in X 2.91 in) |
| Horsepower | 24.3 PS (17.9 kW; 24.0 HP) at 2,400 rpm |
| Starter | Electric |
| Oil capacity: | 2.4 L (2.5 US. qt, 2.1 Imp. qt.) |
| Coolant capacity: | 3.2 L (3.4 US. qt, 2.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 14.5 kmh (9 mph) Reverse: 9.0 kmh (5.6 mph) |
| Transmission oil capacity | 7.6 L (2 US. gal, 1.7 Imp. gal.) |
| Tires | |
| Front tires | Ag: 18×8.5-10 |
| Rear tires | Ag: 26×12.0-12 |
| Three-Point Hitch | |
| Category | I Limited |
| Control type | – |
| Lift capacity (at 610 mm/24 in) | 300 kg (660 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent |
| Middle PTO speed | 2,100 rpm |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pump flow | 3.5 gpm (13.2 lpm) |
| Steering flow | 3.6 gpm (13.6 lpm) |
| Total flow | 7.1 gpm (26.9 lpm) |
What kind of transmission fluid does the sc 2400 take?