Ferguson Pony

Ferguson PonyThe Ferguson Pony is a 2WD utility tractor manufactured by Ferguson in Woodstock, Ontario, Canada from 1952 to 1954. The Ferguson Pony is equipped with a 1.0 L (61.9 cu·in) four-cylinder gasoline engine and a unsynchronized gear transmission with 3 forward and 1 reverse gears.

The Ferguson Pony utility tractor used the Continental N62 engine. It is a 1.0 L, 1,015 cm2, (61.9 cu·in) four-cylinder natural aspirated gasoline engine with 60.0 mm (2.36 in) of the cylinder bore and 89.0 mm (3.5 in) of the piston stroke. The compression ratio rating is 6.5:1. This engine produced 11.8 PS (8.7 kW; 11.7 HP) at 1,800 rpm of output power.

The Ferguson Pony is equipped with manual steering, differential mechanical contracting band brakes, open operator station and 26.5 liters (7 US gal.; 5.8 Imp. gal) fuel tank.

Ferguson Pony Specifications

General Specifications
Model Ferguson Pony
Height 1,520 mm (59.8 in)
Wheel base 1,670 mm (65.7 in)
Weight (operating) 857 kg (1,889 lbs)
Fuel tank capacity 26.5 liters (7 US gal.; 5.8 Imp. gal)
Cabin type Open operator station
Engine model Continental N62
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 1.0 L, 1,015 cm2, (61.9 cu·in)
Bore and stroke 60.0 mm X 89.0 mm (2.36 in X 3.5 in)
Compression ratio 6.5:1
Horsepower 11.8 PS (8.7 kW; 11.7 HP) at 1,800 rpm
Starter Electric
Oil capacity: 3.8 L (4 US. qt, 3.3 Imp. qt.)
Coolant capacity: 6.6 L (7 US. qt, 5.8 Imp. qt.)
Spark plug Champion 18625A
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Differential mechanical contracting band
Final drive Bull gear
Transmission model
Transmission type Unsynchronized gear with mechanical dry disc clutch
Gears 3 forward and 1 reverse
Speed Forward: 11.3 kmh (7 mph) Reverse: 5.2 kmh (3.2 mph)
Transmission oil capacity 3.4 L (0.9 US. gal, 0.7 Imp. gal.)
Front tires Ag: 4.00x-15
Rear tires Ag: 8-24, 9-24
PTO (Power take-off shaft)
Rear PTO type Optional
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 1.5 L (0.4 US. gal, 0.3 Imp. gal.)
Pump flow 2.5 gpm (9.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.