Honda H5013

Honda H5013The Honda H5013 is a small tractor with vertical general-purpose Honda GXV390 engine (389 cc, 23.7 cu-in) and selective sliding eight speeds forward and four speeds reverse transmission. The Honda H5013 small tractor was produced from 1991 to 1999.

The Honda GXV390 is air-cooled single-cylinder four-stroke gasoline engine with vertical PTO shaft. The GXV390 engine has an OHV design with two valves; sophisticated air intake system and multi-chamber exhaust system. An 88.0 mm (3.46 in) cylinder bore and 64.0 mm (2.5 in) piston stroke give the motor a total of 389 cc (23.7 cu-in) of displacement. Compression ratio rating is 7.7:1. The Honda GXV390 motor produces 13.0 HP (9.7 kW) at 3,600 rpm and 28.0 Nm (2.8 kg·m, 20.3 ft·lb) of torque at 2,500 rpm.

The Honda H5013 tractor used a mechanical leading-trailing shoe type brakes and pinion-and-sector four-wheel steering. The tactor has 150 mm (5.9 in.) of ground clearance. The Honda H5013 is avalible in two versions:

  • A4 type – two and four-wheel drive;
  • A2 type – two-wheel drive only

Honda H5013 specifications

General Specifications
Model Honda H5013
Length 2,190 mm (86.2 in)
Width 1,060 mm (41.7 in)
Height 1,758 mm (870.3 in)
Wheel base 1,305 mm (51.4 in.)
Dry weight (without tines) A4 type: 465.0 kg (1025.0 lbs)
A2 type: 430.0 kg (948.0 lbs)
Wheel tread Front: 855 mm (33.7 in.)
Rear: 850 mm (33.5 in.)
Groundclearance 150 mm (5.9 in.)
Front tires size 20×7.0-12
Front tires pressure 98 kPa (1.0 kg/cm2, 14 psi)
Rear tires size 24.5×8-14
Rear tires pressure 78 kPa (0.8 kg/cm2, 11 psi)
Fuel tank capacity 8.5 l (2.2 US gal.)
Engine
Engine model Honda GXV390
Displacement 389 cm3 (23.7 cu-in)
Bore x stroke 88.0 X 64.0 mm (3.46 x 2.5 in)
Max. horsepower 13.0 HP (9.7 kW) at 3600 rpm
Max. torque 28.0 Nm (2.8 kg·m, 20.3 ft·lb) at 2,500 rpm
Carburetor Horizontal type, butterfly valve
Cooling system Forced-air
Ignition system Transistorized magneto ignition
Lubricating system Pressure and splash
Starting system Electric starter
Stoping system Ignition primary circuit ground
Fuel used Unleaded gasoline (octane number 86 or higher)
Spark plug NGK: BPR5ES
NIPPONDENSO: W16EPR-U
Oil type Honda 4-stroke or an equivalent (SF or SG)
Recommended oil SAE 10W-30
Oil capacity 1.1 L (1.2 US gal, 1.0 lmp qt)
Transmission
Gear type Selective sliding 8 speeds forward and 4 speeds reverse transmission
Gear selections 8 forward, 4 reverse
Groung speeds Forward:
1 (L-1): 0.7 km/h (0.4 mph)
2 (H-1): 1.1 km/h (0.7 mph)
3 (L-2): 1.5 km/h (0.9 mph)
4 (H-2): 2.3 km/h (1.4 mph)
5 (L-3): 3.2 km/h (2.0 mph)
6 (H-3): 5.1 km/h (3.2 mph)
7 (L-4): 6.8 km/h (4.2 mph)
8 (H-4): 10.7 km/h (6.6 mph)

Reverse:
1 (L-R1): 0.8 km/h (0.5 mph)
2 (H-R1): 1.3 km/h (0.8 mph)
3 (H-R2): 1.7 km/h (1.1 mph)
4 (H-R2): 2.7 km/h (1.7 mph)

Frame
Brakes Mechanical leading-trailing shoe type brake (rear wheels)
Steering Pinion-and-sector four-wheel steering
Hydraulic system
Working pressure 90 kg/cm2 (1,280 psi)
Pump type Gear pump
Oil capacity 1.8 L (1.9 US. qt)
1.95 L (2.1 US.qt) with rear hydraulic lift
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*