Honda HA4118

Honda HA4118The Honda HA4118 is a 2WD lawn tractor manufactured by John Deere for distributor Honda in Horicon, Wisconsin, USA from 1998 to 2001. The Honda HA4118 is equipped with a 0.6 L (37.5 cu·in) two-cylinder gasoline engine and a hydrostatic transmission with infinite forward and reverse gears.

The Honda HA4118 lawn tractor used the Honda GXV610 engine. It is a 0.6 L, 614 cm2, (37.5 cu·in) two-cylinder natural aspirated gasoline engine with 77.0 mm (3.03 in) of the cylinder bore and 66.0 mm (2.6 in) of the piston stroke. The compression ratio rating is 8.3:1. This engine produced 18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm of output power.

The Honda HA4118 is equipped with an open operator station, 9.5 liters (2.5 US gal.; 2.1 Imp. gal) fuel tank, and a mid-mount 960 mm (38 in) mower deck with 2-blades.

Honda HA4118 Specifications

General Specifications
Model Honda HA4118
Length 1,730 mm (68.1 in)
Width 1,260 mm (49.6 in)
Height 1,030 mm (40.6 in)
Wheel base 1,160 mm (45.7 in)
Weight 244 kg (538 lbs)
Fuel tank capacity 9.5 liters (2.5 US gal.; 2.1 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model Honda GXV610
Engine type Four-stroke, air-cooled, V
Cylinders 2
Fuel type Gasoline
Displacement 0.6 L, 614 cm2, (37.5 cu·in)
Bore and stroke 77.0 mm X 66.0 mm (3.03 in X 2.6 in)
Compression ratio 8.3:1
Horsepower 18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm
Starter Electric
Oil type SAE 10W-30
Oil capacity: 2.2 L (2.3 US. qt, 1.9 Imp. qt.)
Spark plug NGK BPR5ES
Transmission and chassis
Chassis 4×2 2WD
Steering type –
Brakes –
Transmission model Tuff Torq K61
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 8.0 kmh (5 mph) Reverse: 3.9 (2.4 mph)
Transmission oil capacity 3.4 L (0.9 US. gal, 0.7 Imp. gal.)
Tires
Front tires Lawn/turf: 15×6.00-6
Rear tires Lawn/turf: 20×10.00-8
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*