The John Deere 1026R is a 4WD sub-compact utility tractor from the Sub-Compact 1 series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2011 to 2012. The John Deere 1026R is equipped with a 1.1 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.
The John Deere 1026R sub-compact utility tractor used the Yanmar 3TNV76 engine. It is a 1.1 L, 1,116 cm2, (68.0 cu·in) three-cylinder natural aspirated diesel engine with 74.0 mm (2.91 in) of the cylinder bore and 81.0 mm (3.19 in) of the piston stroke. The compression ratio rating is 23.5:1. This engine produced 25.6 PS (18.8 kW; 25.2 HP) at 3,200 rpm of maximum output power.
The John Deere 1026R is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 21.0 liters (5.5 US gal.; 4.6 Imp. gal) fuel tank.
Following attachments are available for the John Deere 1026R sub-compact utility tractor:
- Mid-mount John Deere 54D AutoConnect 54 in (1,370 mm) mower deck
- Mid-mount John Deere 60D AutoConnect 60 in (1,520 mm) mower deck
- John Deere D120 loader
- John Deere H120 backhoe
John Deere 1026R Specifications
| General Specifications | |
| Model | John Deere 1026R |
| Length | 2,220 mm (87.4 in) |
| Width | 1,190 mm (46.9 in) |
| Height | 1,990 mm (78.3 in) |
| Wheel base | 1,450 mm (57.1 in) |
| Weight | 654 kg (1,442 lbs) |
| Fuel tank capacity | 21.0 liters (5.5 US gal.; 4.6 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | Yanmar 3TNV76 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.1 L, 1,116 cm2, (68.0 cu·in) |
| Bore and stroke | 76.0 mm X 82.0 mm (2.99 in X 3.23 in) |
| Compression ratio | 23.5:1 |
| Horsepower | 25.6 PS (18.8 kW; 25.2 HP) at 3,200 rpm |
| Starter | Electric |
| Oil capacity: | 2.7 L (2.9 US. qt, 2.4 Imp. qt.) |
| Coolant capacity: | 3.7 L (3.9 US. qt, 3.3 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 14.6 kmh (9.1 mph) Reverse: 14.6 (9.1 mph) |
| Transmission oil capacity | 12.3 L (3.2 US. gal, 2.7 Imp. gal.) |
| Tires | |
| Front tires | Lawn/turf: 18×8.5-10 |
| Rear tires | Lawn/turf: 26×12.00-12 |
| Three-Point Hitch | |
| Caterogy | I Limited |
| Control type | Position control |
| Lift capacity (at ends) | 650 kg (1,430 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent |
| Middle PTO speed | 2,100 rpm |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 12.3 L (13 US. qt, 10.82 Imp. qt.) |
| Pressure | 2,000 psi (138 bar) |
| Valves | 2 to 3 |
| Total flow | 6.3 gpm (23.8 lpm) |